Search found 10 matches

by Eatitup86
Mon Feb 04, 2019 5:12 pm
Forum: SNESdev
Topic: Can C# access USB2SNES WRAM?
Replies: 4
Views: 4685

Can C# access USB2SNES WRAM?

I am wondering if the USB2SNES interface allows for direct access to the WRAM on a running game? I know you can read and alter the data within the included Memory Viewer application but everything I have seen that interfaces with it uses some janky web connection socket that often results in erratic...
by Eatitup86
Sat May 19, 2018 11:12 pm
Forum: NES Hardware and Flash Equipment
Topic: Perfect FDS 2C33 audio when not using actual FDS disks?
Replies: 259
Views: 97553

Re: Perfect FDS 2C33 audio when not using actual FDS disks?

Update: Scratch that I managed to get it working. Most versions online appear to be improperly patched so you have to do it yourself. Original Post: Has anyone tested the Kalin no Tsurugi (Sword of Kalin) English patch? Every time I try to load it I am getting Disk Trouble ERR. 25 If you run the gam...
by Eatitup86
Sat Dec 17, 2016 12:39 am
Forum: NES Hardware and Flash Equipment
Topic: Hi-Def NES HDMI Adapter for the NES
Replies: 623
Views: 255290

Re: Hi-Def NES HDMI Adapter for the NES

Really makes me wonder if the Korean PPU's are all incompatible with the Hi-Def NES? I tinkered with mine for a day after it was not working and had no luck myself. :\ I do have another NES but I was wanting to keep one stock along with my other 2 being NESRGB + Hi-Def. Have had 0 problems with my N...
by Eatitup86
Sat Nov 26, 2016 3:27 am
Forum: NES Hardware and Flash Equipment
Topic: Hi-Def NES HDMI Adapter for the NES
Replies: 623
Views: 255290

Re: Hi-Def NES HDMI Adapter for the NES

I recently received a Hi-Def NES kit from the latest batches being sent out. I was actually kinda surprised to see the red board since it is for a Frontloader install but I went ahead and proceeded to pull my CPU & PPU, install the pre-assembled interposers, remove the 7805, hook up the ribbon cable...
by Eatitup86
Wed Nov 23, 2016 11:37 pm
Forum: NES Hardware and Flash Equipment
Topic: Kazzo USB rom dumper / dev cart programmer
Replies: 672
Views: 361102

Re: Kazzo USB rom dumper / dev cart programmer

Has anyone successfully dumped Akumajou Densetsu with this?

I purchased one to back up my library & am having trouble getting it to dump properly.
by Eatitup86
Thu Sep 22, 2016 3:31 pm
Forum: NES Hardware and Flash Equipment
Topic: How to create a dual output NES controller?
Replies: 19
Views: 5087

Re: How to create a dual output NES controller?

Yep pausing stops a lot of in game timers. I would think it would be possible to capture the total frames with an update to a device like the AVS though wouldn't it? That would be a really neat feature. It already does have a timer that kicks of right when you start a game but does not really use it...
by Eatitup86
Thu Sep 22, 2016 10:36 am
Forum: NES Hardware and Flash Equipment
Topic: How to create a dual output NES controller?
Replies: 19
Views: 5087

Re: How to create a dual output NES controller?

That all is pretty interesting. I didn't try the TASBot solution because I already have the parts here to attempt the controller setup and I am not sure I have enough knowledge to build one. I did not know the hz were actually different between the consoles and that actually is kinda surprising give...
by Eatitup86
Thu Sep 22, 2016 12:51 am
Forum: NES Hardware and Flash Equipment
Topic: How to create a dual output NES controller?
Replies: 19
Views: 5087

Re: How to create a dual output NES controller?

Quick update + photos. I tried to link the voltage point on both by disconnecting one and running a wire to the other. It sorta works. When I press up or down the AVS adds right to it and pressing right adds down while left seems to work fine. During all that the nes functions normally. Also other b...
by Eatitup86
Wed Sep 21, 2016 2:39 pm
Forum: NES Hardware and Flash Equipment
Topic: How to create a dual output NES controller?
Replies: 19
Views: 5087

Re: How to create a dual output NES controller?

I attempted to only hook up one 5V to both and it would not work. When both are separated into their own boards though shouldn't they function independently? The only thing connecting the two is the ground and the buttons with my current setup. Does every button need to be independently grounded for...
by Eatitup86
Wed Sep 21, 2016 12:33 pm
Forum: NES Hardware and Flash Equipment
Topic: How to create a dual output NES controller?
Replies: 19
Views: 5087

How to create a dual output NES controller?

Hi there, I have recently been attempting to create a dual output nes controller so that I can hook up & compare 2 consoles with 1 to 1 input using the same game. So far I have tried to hook 2 output cables to the leads on a single board and it makes one of the NES' screens turn purple or not turn o...