I've try to repro datach game and put on BANDAI-LZ93D50 Board but all datach game use CHR-RAM. Game work find but graphic error. I don't know how to rewire 8k CHR RAM 28pin put on to 32pin BANDAI-LZ93D50 board.
Does anyone can help this?
Thank you.
need help for rewire CHR-RAM mapper159
Moderator: Moderators
Re: need help for rewire CHR-RAM mapper159
The Datach uses a different package for its LZ93D50 than the other parts. As far as we know, the IC itself is compatible, but it's hooked up differently and you'll have to rewire quite a lot.
Naruko has notes in Japanese: http://seesaawiki.jp/famicomcartridge/d/Bandai%20Datach ; http://seesaawiki.jp/famicomcartridge/d ... 20standard
Most pertinently, the Datach games do not support CHR RAM banking at all, and instead just support a flat 8 KiB chunk; additionally, if you want to support the external EEPROM, you'll have to disconnect PPU A12 from the IC and tie that input low.
Naruko has notes in Japanese: http://seesaawiki.jp/famicomcartridge/d/Bandai%20Datach ; http://seesaawiki.jp/famicomcartridge/d ... 20standard
Most pertinently, the Datach games do not support CHR RAM banking at all, and instead just support a flat 8 KiB chunk; additionally, if you want to support the external EEPROM, you'll have to disconnect PPU A12 from the IC and tie that input low.