Somebody know the donor card for crisis force ?

Are you new to 6502, NES, or even programming in general? Post any of your questions here. Remember - the only dumb question is the question that remains unasked.

Moderator: Moderators

User avatar
tokumaru
Posts: 11866
Joined: Sat Feb 12, 2005 9:43 pm
Location: Rio de Janeiro - Brazil

Post by tokumaru » Mon Oct 26, 2009 8:59 pm

Sure, linking here isn't a problem, what I found weird is that they do it like if it was their forum.

At first I didn't understand when the guy asked if this was ROM Lab's forum, but now it makes sense.

User avatar
Memblers
Site Admin
Posts: 3884
Joined: Mon Sep 20, 2004 6:04 am
Location: Indianapolis
Contact:

Post by Memblers » Mon Oct 26, 2009 9:09 pm

Right, yeah it would be better if it said "NESdev forum" or otherwise indicated that it's an external link.

User avatar
idrik
Posts: 31
Joined: Sat Aug 30, 2008 9:12 am

Post by idrik » Tue Oct 27, 2009 4:57 pm

@Banshaku and Bregalad Thank you the next time I shall post in French in the section international, maintaining with years my English are not very good it's possible :wink:

User avatar
idrik
Posts: 31
Joined: Sat Aug 30, 2008 9:12 am

Post by idrik » Tue Oct 27, 2009 5:08 pm

nintendo2600 wrote:You can use TMNT 1 or TMNT 2 as a cheap famicom donor to make Crisis Force. You will need to track down 2k ram chips though as neighter have WRAM on board and Crisis Force needs it. Also you will have to build\use a famicom adaptor to ge tthe board from 60 to 72 pins. As for your PAL\NTSC issue, well your on your own there.
Thank you for this beginning of answer it gives me one idea would have you the correspondence between 60 pins and 72 pins?

tepples
Posts: 22055
Joined: Sun Sep 19, 2004 11:12 pm
Location: NE Indiana, USA (NTSC)
Contact:

Post by tepples » Wed Oct 28, 2009 4:36 am


User avatar
idrik
Posts: 31
Joined: Sat Aug 30, 2008 9:12 am

Post by idrik » Wed Oct 28, 2009 2:58 pm

thank you tepples :wink:

Post Reply