Page 1 of 1

MAX795 - MAD-1 alternative

Posted: Mon Feb 06, 2017 2:50 pm
by MaarioS
Hi there, I want to use a MAX795 chip on my new SNES cartridge board that uses new chips. Although the game works 100% OK on my cart, it crashes completely at the time when the console wants to read from SRAM. I used MAX795 chip for this purpose and I suspect this is the problem. I checked several SRAM chips and the effect is exactly the same every time...

Here's how I connected the MAX795 chip. Is this correct??
Image

It works completely random with random glitches but it almost never works and I'm really out of ideas... At least BA6162 chip worked fine but unfortunately I ran out of them and I only have MAX795 right now that doesn't work. Here's the datasheet just for the convenience:
https://datasheets.maximintegrated.com/ ... AX795T.pdf

Anyone have any kind of suggestions?? Please for reply. Many thanks in advance!!

Re: MAX795 - MAD-1 alternative

Posted: Wed Mar 01, 2017 12:50 pm
by Ice Man
I'd be interested in such logic, too.
I want to make my own board with this as well.

As for your problem, I cannot help much but maybe try this:

Code: Select all

Original Pinout:
					  __  __
				OUT |01\/24| BATT
				VCC |02  23| /RESET
		  BATT ON |03  22| /CE OUT
				GND |04  21| /CE IN
					  ------

Pinout for SNES:					 
					  __  __
		 SRAM VCC |01\/24| 3V BAT w. 1k Ohm Resistor
				VCC |02  23| NC
			    NC |03  22| SRAM /CE
				GND |04  21| Cart #26
					  ------