It is currently Mon Oct 23, 2017 6:35 am

All times are UTC - 7 hours



Forum rules


Related:



Post new topic Reply to topic  [ 7 posts ] 
Author Message
PostPosted: Thu Aug 17, 2006 8:12 pm 
Offline

Joined: Mon Oct 31, 2005 1:01 am
Posts: 107
How do I read the information printed on the outside of sram chips to get their size? I tried googling what's on the chips and also search a couple component stores for sizes but I didn't have much luck...


Top
 Profile  
 
 Post subject:
PostPosted: Thu Aug 17, 2006 8:59 pm 
Offline
User avatar

Joined: Mon Sep 27, 2004 2:13 pm
Posts: 1667
Location: .ma.us
6264 is the generic name for 8Kbit x 8
6216 is 2kib
62128 is 16kib
62256 is 32kib
62512 is 64kib
628128 is 1m
628256 is 2m
628512 is... 4m

8M SRAM aren't terribly common but do exist as do 16 and 32M, the names of 8M plus aren't standardized and often aren't available in DIP packages. After 8M you're talking $20+ an IC in hobby quantities.


<something>65 is probably 64kbit as well

<something>LP = low power

<something>-12 = 120ns
<something>-20 = almost certainly 200ns
<something>-10 = either 100ns or 10ns (only really expensive recent SRAM are 10ns)
<something>-7 = 70ns
<something>-70 = 70ns


If you can't remember just go to datasheetarchive.com


Top
 Profile  
 
 Post subject:
PostPosted: Fri Aug 18, 2006 12:00 am 
Offline

Joined: Mon Oct 31, 2005 1:01 am
Posts: 107
I guess I'm kinda screwed if it's not at that site?

I've got this on a nes related circuitboard:

LH51168FB-10TL
LSMLOGIC JAPAN
D223 #HBG

I've got this on a DQV J:

Sanyo
LC3564QL-10N
JAPAN 25075


I know I can look up the DQV (I would guess 64), but I was really hoping to be able to figure out the other one. I was also hoping that there was some simple method of knowing like how eproms are marked... :)


Top
 Profile  
 
 Post subject:
PostPosted: Fri Aug 18, 2006 8:08 am 
Offline
User avatar

Joined: Mon Sep 27, 2004 2:13 pm
Posts: 1667
Location: .ma.us
The Sharp is a standard 6116 (2k)

The Sanyo is a standard 6264 (8k)


Top
 Profile  
 
 Post subject:
PostPosted: Fri Aug 18, 2006 10:14 am 
Offline
User avatar

Joined: Mon Sep 27, 2004 8:33 am
Posts: 3715
Location: Central Texas, USA
The number of pins on the chip package also give an indication of the maximum size it could be. There are usually 8 pins for data, two for power, one or two for chip select, one for read/write differentiation, and the rest could be for address selection.


Top
 Profile  
 
 Post subject:
PostPosted: Fri Aug 18, 2006 12:00 pm 
Offline

Joined: Mon Oct 31, 2005 1:01 am
Posts: 107
Ok, kyuusaku, please tell me how you found those out? I may just not be dense, but I want to learn how to look that up! I tried the website that you posted, but I couldn't find either.

I don't want to be one of those guys who just asks crap randomly because they never took the time to know anything. I actually want to learn! :)


Top
 Profile  
 
 Post subject:
PostPosted: Fri Aug 18, 2006 12:11 pm 
Offline
User avatar

Joined: Mon Sep 27, 2004 2:13 pm
Posts: 1667
Location: .ma.us
Generally it's:

*16* = 16kbit = 2k = 6116
*64* = 64kbit = 8k = 6246

LH = Sharp, instead of 61/62 they use 51

Maybe Sanyo uses 35 instead of 62, dunno

You just remember this stuff when you spend a lot of time tinkering.
When you enter the part number in a search engine, remove the stuff after the ROM size, most people omit that so it will restrict your matches

(instead of LH51168FB-10TL, search LH51168) generally you won't even care about the stuff after the ROM size. In this case, Sharp tacked on an extra 8 (to point out the obvious 16x8) on the product code so that complicated things a little but remove it and you get the generic Sharp part which is LH5116 (6116)


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 7 posts ] 

All times are UTC - 7 hours


Who is online

Users browsing this forum: No registered users and 8 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group