nesdev.com
http://forums.nesdev.com/

Nestopia (OSX) and Battery .SAV Files - solved!
http://forums.nesdev.com/viewtopic.php?f=2&t=5262
Page 1 of 1

Author:  neilbaldwin [ Sun May 31, 2009 10:17 am ]
Post subject:  Nestopia (OSX) and Battery .SAV Files - solved!

After my recent trouble getting this to work and after an inordinate amount of patience and help from Memblers and kevtris last night over on #nesdev, I've finally solved the problem.

These seem to be mainly just with just the Mac OSX build of Nestopia so it may not apply to everyone but I went through so much pain, I'm sharing in the hope that someone else might not have to suffer :)

- Nestopia only writes the .SAV file when you QUIT the program. Peculiar to the OSX version, you can close the emulator window without quitting Nestopia. This tripped me up for quite a while.

- If you clear the SRAM with zeros (00), Nestopia seems to decide that there's no need to output the .SAV file. This could be linked to the next point (I think this is true of the Windows/XP version too).

- The .SAV file is not raw binary data, it's ZIP compressed. To see the actual data in your .SAV file, add ".zip" to the end of the filename and then decompress it. Voila - now you have raw data as written in your code. In this state it's unreadable by Nestopia but you can just recompress the file and then rename it "xxxxxxxx.sav" instead of "xxxxxxxx.zip" and Nestopia will recognise it again.

I checked on the XP version of Nestopia and it saves the .SAV file as raw data. I guess there's an option somewhere but it's not exposed on the OSX version.

Author:  AdamFeintuch [ Thu Nov 04, 2010 2:58 am ]
Post subject: 

neilebaldwin wrote:
After my recent trouble getting this to work and after an inordinate amount of patience and help from Memblers and kevtris last night over on #nesdev, I've finally solved the problem.

These seem to be mainly just with just the Mac OSX build of Nestopia so it may not apply to everyone but I went through so much pain, I'm sharing in the hope that someone else might not have to suffer :)

- Nestopia only writes the .SAV file when you QUIT the program. Peculiar to the OSX version, you can close the emulator window without quitting Nestopia. This tripped me up for quite a while.

- If you clear the SRAM with zeros (00), Nestopia seems to decide that there's no need to output the .SAV file. This could be linked to the next Jes Extender https://dudehung.com/my-jes-extender-review-and-results point (I think this is true of the Windows/XP version too).

- The .SAV file is not raw binary data, it's ZIP compressed. To see the actual data in your .SAV file, add ".zip" to the end of the filename and then decompress it. Voila - now you have raw data as written in your code. In this state it's unreadable by Nestopia but you can just recompress the file and then rename it "xxxxxxxx.sav" instead of "xxxxxxxx.zip" and Nestopia will recognise it again.

I checked on the XP version of Nestopia and it saves the .SAV file as raw data. I guess there's an option somewhere but it's not exposed on the OSX version.


Thanks Neil Baldwin. I realized this too but it was a problem for me because I rarely ever close my programs because it's easier to just keep them open.

Page 1 of 1 All times are UTC - 7 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/