nesdev.com
http://forums.nesdev.com/

Drawing power
http://forums.nesdev.com/viewtopic.php?f=20&t=17400
Page 1 of 1

Author:  tepples [ Wed May 30, 2018 10:50 am ]
Post subject:  Drawing power

Someone in the GBDev Discord server wants to know how much current a peripheral can safely draw over the link port. Who here has an ammeter and a worm light?

Author:  lidnariq [ Wed May 30, 2018 11:18 am ]
Post subject:  Re: Drawing power

Frohwein's schematic indicates that there's a diode in series with the DMG's Vcc output.
Gekkio's pictures of the original DMG's mainboard show a silkscreened name of "1SS254" right next to the diode.
The 1SS254's datasheet says that this diode is rated for a maximum of 130mA mean, 400mA repetitive max.

I vaguely suspect, without evidence, that the DMG's flyback converter and/or battery life will impose a lower limit.

I'll note, without any idea if it's "ok", that Catskull Electronics apparently sells a simple passive adapter between the DMG's link port and a PS/2 peripheral, and apparently LSDJ can support a keyboard connected in this way.

Page 1 of 1 All times are UTC - 7 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/