MOON8 - Dark Side of the Moon cover

A place where you can keep others updated about your NES-related projects through screenshots, videos or information in general.

Moderator: Moderators

User avatar
rainwarrior
Posts: 7734
Joined: Sun Jan 22, 2012 12:03 pm
Location: Canada
Contact:

MOON8 - Dark Side of the Moon cover

Post by rainwarrior » Fri Jul 20, 2012 6:11 pm

I did this about 2 years ago, but at the time I didn't know how to get this stuff onto an actual NES. So... I finally got around to building an NES ROM / NSF version.

Info here: http://rainwarrior.ca/music/moon8.html
Image
Download: NSF, NSFe, NES, source.

video demonstration
Last edited by rainwarrior on Tue Aug 28, 2012 5:49 pm, edited 1 time in total.

ccovell
Posts: 1009
Joined: Sun Mar 19, 2006 9:44 pm
Location: Japan
Contact:

Post by ccovell » Fri Jul 20, 2012 11:50 pm

Pretty good! You've channeled Rob Hubbard's, Martin Galway's, and Capcom's interpretations of Floyd into a nice style.

How about some of Wish You Were Here next?

Or Division Bell with speech synthesis? :wink:

User avatar
infiniteneslives
Posts: 2098
Joined: Mon Apr 04, 2011 11:49 am
Location: WhereverIparkIt, USA
Contact:

Post by infiniteneslives » Sat Jul 21, 2012 12:09 am

VERY cool. Nice to see music showcased so well all on its own. The sound channel display is pretty neat too.

User avatar
rainwarrior
Posts: 7734
Joined: Sun Jan 22, 2012 12:03 pm
Location: Canada
Contact:

Post by rainwarrior » Sun Jul 22, 2012 7:34 pm

Thanks. I dunno if I'll be making another cover album any time soon; I did a Classical Album last year (but it's not ROM/Cartridge-able because it uses various expansions). Probably will do something original later this year.

Why speech synthesis for Division Bell? O_o

hcs
Posts: 31
Joined: Mon Nov 27, 2006 11:34 pm
Location: NYC
Contact:

Post by hcs » Sun Jul 22, 2012 7:38 pm

All we need to do is make sure we Steve Hawking.

Awesome on moon8, I've got my order in!

User avatar
juef
Posts: 67
Joined: Thu Jul 15, 2010 8:20 am
Location: Québec, Canada

Post by juef » Mon Jul 23, 2012 6:06 am

Very nice! :D
Out of curiosity, how much were you selling the cartridge version for?

User avatar
Bregalad
Posts: 7808
Joined: Fri Nov 12, 2004 2:49 pm
Location: Chexbres, VD, Switzerland

Post by Bregalad » Mon Jul 23, 2012 8:50 am

Mmh... this is supposed to sound like music ?
Life is complex: it has both real and imaginary components.

User avatar
rainwarrior
Posts: 7734
Joined: Sun Jan 22, 2012 12:03 pm
Location: Canada
Contact:

Post by rainwarrior » Mon Jul 23, 2012 10:01 am

It's supposed to sound like Dark Side of the Moon. The opening track is a collection of noises, maybe start at "Breathe" if you want to hear "music".

juef, I will probably do a second run of them, but I haven't settled on a price yet. I'm still collecting information and considering how the first batch went.

User avatar
NESHomebrew
Formerly WhatULive4
Posts: 403
Joined: Fri Oct 30, 2009 4:43 am
Contact:

Post by NESHomebrew » Mon Jul 23, 2012 5:32 pm

juef wrote:Very nice! :D
Out of curiosity, how much were you selling the cartridge version for?
There were 18, and they were $50 shipped (to me anyway). Went pretty fast.

User avatar
rainwarrior
Posts: 7734
Joined: Sun Jan 22, 2012 12:03 pm
Location: Canada
Contact:

Post by rainwarrior » Wed Jul 25, 2012 12:05 pm

Yes, it sold for $45 plus $5-7 shipping (depended on region).


I was trying to avoid going into it, but I received a disturbing e-mail today from a buyer complaining that I was planning to make more, because apparently the presumed scarcity was what motivated him to buy it. This seriously offended me, as my goal is to get this in the hands of anybody who wants it at as fair a price as possible. (This is also why I released the ROM and source freely.)

Anyhow, I was going to explain why I think this is a fair price, but then I thought I'd do something better and "open source" my breakdown here, since this would probably be interesting to anyone who wants to build carts.

Parts cost per unit, on a batch of 25:

$4.00 - Ciclone from retrousb
$4.00 - ReproPak from retrousb
$4.00 - Case from retrousb
$1.56 - Shipping from retrousb to Canada
$1.60 - Taxes/duty on retrousb parts
$1.22 - Adhesive printed label from local print shop
$3.42 - OTP 27C020 (PRG-ROM) from Mouser
$1.41 - 62256 (CHR-RAM) from Mouser
$0.28 - 74HC161 (AOROM mapper) from Mouser
$0.25 - Capacitors from Mouser
$0.80 - Shipping from Mouser
$0.43 - Shipping envelope from eBay
$0.33 - Adhesive shipping label from eBay
$2.13 - Royalties for cover album from Limelight
-------
Total: $25.43

Between gathering parts, burning EPROMs, soldering, assembling carts, and testing, I did not keep a good record of my time spent, but I think each cart takes an average of 40 minutes to produce. About 20 minutes of that are spent soldering, though I had many fail initially that worked after some additional time resoldering them.

On 25 carts I had 3 failures I was unable to fix, and have withheld 4 working carts from sale in case any need to be replaced.

The flat rate shipping prices I offered were slightly less than the actual cost of shipping via Canada Post (I rounded down to the nearest whole number). For the purposes of this calculation, I'll ignore the difference.

Sales: $810.00 ( $45 x 18 )
Parts: $635.75 ( $25.43 x 25 )
Difference: $174.25
Labour: 17 hrs ( 40 min x 25 )
Wage: $10.25/hr ( $174.25 / 17 )

There are a number of costs not included here, some are one time costs like an EPROM burner, a soldering iron, tools, powerpak, etc. I am not really sure how much solder I used, maybe $0.25 worth per cart? Also, obviously I did not include programming time, or any of the time I spent originally making the music (this is probably well over 100 hours, maybe 10 of which was programming this ROM).

So, ignoring all the setup costs, at $45 this is a minimum wage job. I'm not really complaining about that, as I'm doing this for fun and am satisfied as long as I'm not losing money at it, but I think you can see why I was offended by someone complaining that their collector's item isn't going to be "collectible" enough. I want make this cart as accessible as possible to people.


There are a number of ways to cut costs. If I'm lucky I will have fewer failures in the next batch, and fewer that need to be reworked after the first soldering. I had some problems with my soldering iron as well, especially with the through holes on the PCB that were attached to the ground plane. I eventually got a more appropriate tip for my iron, and developed a bit better technique, but I'm hoping there aren't latent failure cases in the ones I sent out.

Some have suggested donor carts as an alternative to retrousb new parts, but this is $15/cart vs whatever the cost of donor carts and probably at least 20 minutes of labour desoldering the chips and removing the label, provided you can even find large quantities of cheap carts with the right mappers, and presuming the failure rate isn't even higher with donors. (Also you have to be willing to destroy existing games, obviously.) I don't really think I'd want to try that route for more than one or two carts. For making 20 or 100, I think new parts are the way to go.

If I was making a batch of 100, that's about the point where is seems to be worthwhile to have my own PCB made. Not sure about plastic cases. The Ciclone I don't have the knowledge/ability to replace, and probably you'd need to make 1000 of them to be worthwhile? Other electronics parts get slightly cheaper at 100 units. For my smaller quantities, retrousb's parts are as cost effective as it gets, I think, if you aren't willing to scavenge donors.

There's about $2 worth of royalties per unit necessary for these that wouldn't be for an original game.


Also, one seller bought several carts. In retrospect I think I should have cancelled this sale, as this was unfair to others given the limited quantity, but at the time I felt obligated to go through with it. On future runs there will be a limit of one per customer. I really hope the person who bought so many is not planning to scalp them at a higher price, and I am sorry for not cancelling their order.

nesworld
Posts: 17
Joined: Sun Jun 24, 2007 4:17 pm
Location: Denmark
Contact:

Post by nesworld » Wed Jul 25, 2012 1:57 pm

rainwarrior wrote:I received a disturbing e-mail today from a buyer complaining that I was planning to make more, because apparently the presumed scarcity was what motivated him to buy it. This seriously offended me, as my goal is to get this in the hands of anybody who wants it at as fair a price as possible. (This is also why I released the ROM and source freely.)
Hehe, welcome to the new generation of NES collectors, everything must be limited edition and if it's numbered too it's the icing on the cake.

Sad indeed.

But thanks a lot for releasing the rom for everyone to enjoy.

User avatar
rainwarrior
Posts: 7734
Joined: Sun Jan 22, 2012 12:03 pm
Location: Canada
Contact:

Post by rainwarrior » Wed Aug 01, 2012 1:12 pm

By the way, the person I sold several carts to is currently reselling them on eBay for $125. I don't recommend buying it at this price, unless you really want to have it now. I'm sorry for letting this happen.

I'll make more in the future if you can wait for them (just e-mail me if you want to be notified), and should sell for $55 + $5-7 shipping.

User avatar
juef
Posts: 67
Joined: Thu Jul 15, 2010 8:20 am
Location: Québec, Canada

Post by juef » Wed Aug 01, 2012 2:17 pm

It's a bit pricey for my current situation, but perhaps someday :)

It must be quite sad for you to see such a work of love end up on eBay like this. :cry:

User avatar
rainwarrior
Posts: 7734
Joined: Sun Jan 22, 2012 12:03 pm
Location: Canada
Contact:

Post by rainwarrior » Wed Aug 01, 2012 2:31 pm

I suspect he will find buyers even at his high price. I don't find it sad so much as insulting for this guy to profit from my labour in this way. As I said though, I had the power to prevent this and I foolishly did not. I will be more vigilant in the future.

User avatar
infiniteneslives
Posts: 2098
Joined: Mon Apr 04, 2011 11:49 am
Location: WhereverIparkIt, USA
Contact:

Post by infiniteneslives » Wed Aug 01, 2012 8:00 pm

I think you've done a good job of detailing out what actually goes into making carts. Many people are quick to neglect costs of things such as shipping, tax/tariffs, labels, discrete components, and especially labor.

I wasn't able to buy a cart, but I'm not too disappointed based on your generosity of sharing the files and source. I'm happy to see that you got such great response/support from the community noted by the quick sales. I wouldn't get too worked up about the rarity complaints or re-sellers. You can't please everyone and some people are just jerks. I just hope it doesn't deter you from doing more great work in the future.

Post Reply