It is currently Thu May 24, 2018 6:38 pm

All times are UTC - 7 hours





Post new topic Reply to topic  [ 161 posts ]  Go to page Previous  1 ... 7, 8, 9, 10, 11
Author Message
 Post subject: Re: 240p test suite
PostPosted: Wed Feb 21, 2018 8:23 am 
Online

Joined: Sun Sep 19, 2004 11:12 pm
Posts: 20067
Location: NE Indiana, USA (NTSC)
Is it common for others to switch back and forth between solid white and a fine grid? Is there a standard test procedure that I can cite in that test's help page, analogous to the SMPTE standard defining color bars? If you are the only person who would use that feature, it would probably be better as a stand-alone ROM.

But if anyone else expresses interest, I could add Select to switch between solid color screen and a fine line grid.


Top
 Profile  
 
 Post subject: Re: 240p test suite
PostPosted: Wed Mar 14, 2018 11:25 am 
Offline

Joined: Wed Nov 02, 2016 5:54 pm
Posts: 14
tepples wrote:
Is it common for others to switch back and forth between solid white and a fine grid? Is there a standard test procedure that I can cite in that test's help page, analogous to the SMPTE standard defining color bars? If you are the only person who would use that feature, it would probably be better as a stand-alone ROM.

But if anyone else expresses interest, I could add Select to switch between solid color screen and a fine line grid.


Ya I'm not sure how many other people do those kinds of adjustments, not super common, I'm a power user :P

Could you make a stand-along that swaps between them, fine grid, full red, full white?

Also one other way to improve the fine grid is small the dot in the middle indicator, it's certainly useful to see the middle quickly without counting lines; however, certainly can be in the way when scrutinizing the very import static convergence.

a separate way to toggle it on/off would be nice, maybe ideal solution.


Top
 Profile  
 
 Post subject: Re: 240p test suite
PostPosted: Wed Mar 14, 2018 2:23 pm 
Online

Joined: Sun Sep 19, 2004 11:12 pm
Posts: 20067
Location: NE Indiana, USA (NTSC)
The standalone convergence test turned out to be 1.25 KiB, but iNES format rounds that up to 16 KiB.

Left: Switch to grid (or toggle center dot)
Right: Switch to solid color (or toggle white/red)
Start: Toggle help

Automatically detects PAL or NTSC, using 7x8 pixel cells on NTSC or 8x11 pixel cells on PAL.


Attachments:
convergence-0.01.zip [11.45 KiB]
Downloaded 37 times
Top
 Profile  
 
 Post subject: Re: 240p test suite
PostPosted: Sat Mar 17, 2018 4:37 pm 
Offline

Joined: Wed Nov 02, 2016 5:54 pm
Posts: 14
Sick, DLed, I'll check it out really soon.
Thanks!


Top
 Profile  
 
 Post subject: Re: 240p test suite
PostPosted: Tue Mar 20, 2018 2:35 am 
Offline
User avatar

Joined: Thu Jan 04, 2018 5:04 pm
Posts: 6
Looks like a good idea! Thank you.


Top
 Profile  
 
 Post subject: Re: 240p test suite
PostPosted: Mon Apr 09, 2018 5:40 pm 
Online

Joined: Sun Sep 19, 2004 11:12 pm
Posts: 20067
Location: NE Indiana, USA (NTSC)
I guess I ought to post the changes I made a year ago when I was preparing the suite for release as part of Action 53 volume 3.

0.16 (2017-03-13)

  • Grid: Select toggles gray or black background (parity with Genesis test 1.15)
  • Sound test: Added "Crowd", a bytebeat composition by Kragen ported to NES by rainwarrior
  • paginate_help.py: Specify UTF-8 encoding for input file (Python for Windows instead defaults to cp1252)
  • paginate_help.py: Fix NameError in error message formation
  • paginate_help.py: Helper to raise UnicodeEncodeError, whose constructor argument order is undocumented outside interpreter source code
  • makefile: Work around %Path% quirk in Python for Windows


Attachments:
240pee-0.16.zip [193.33 KiB]
Downloaded 47 times
Top
 Profile  
 
 Post subject: Re: 240p test suite
PostPosted: Tue Apr 24, 2018 11:19 pm 
Offline

Joined: Wed Nov 02, 2016 5:54 pm
Posts: 14
Sorry for Delay, been using this for awhile, it's great so far!
Just needs a few more of the important test options and I'll only need to use it to be a lot quicker

1. Down, accesses the black level screen with all the darkest colors compared to black talked about earlier,
2. Up, go to a color bleed screen
3. Press A while on full red or full white to cycle Green and Blue (or some other simple input scheme that doesn't lose the instant, D-right, to cycle red/white)
4. Press A while on grid to bring up overscan test with default to 1 pixel L/R, 7 pixels top bottom. Also original over-scan screen would be nice to have the pixels outside of the grey box all be white rather than everything outside of 0 0 0 0 box is also same grey, because then it's hard to tell your edge with 0 or less.
5. Press A while on black level to bring up a an eye candy screen. Something like a half/half of these two screens below would be awesome and/or a mashup of the NES characters people are most familiar with like: Belmont, Mario(s), Megman, Samus, Link, Little Mac, ect.
https://images.craigslist.org/00w0w_dk7 ... 00x450.jpg
https://images.craigslist.org/00l0l_6iG ... 00x450.jpg
6. Press B while black level to cycle a focus test screen, just white dots on black and black dots on white; or sub dots for text.


Ways to make the color bleed screen better:
The horizontal stripes are great now, but White is the most important, would want to check white bleed on ALL parts of the screen. Would be nice to have 4-6 horizontal stripes that extend ALL the way to left/right sides, and repeat that strip of white strips with section of black in between. Could also allow pressing again/holding D-up to scroll the stripes up. The reason not making it half white stripe half black stripe on full screen is that it puts too much load out at once and is harder to get an accurate bleed test. Input-A could cycle the colors Red, Green Blue could be nice to double check which colors are bleeding more. Input-B could switch to vertical or checker but not important.


Top
 Profile  
 
 Post subject: Re: 240p test suite
PostPosted: Wed Apr 25, 2018 9:41 am 
Online

Joined: Sun Sep 19, 2004 11:12 pm
Posts: 20067
Location: NE Indiana, USA (NTSC)
SpiderWaffle wrote:
Just needs a few more of the important test options and I'll only need to use it to be a lot quicker

1. Down, accesses the black level screen with all the darkest colors compared to black talked about earlier,
2. Up, go to a color bleed screen
3. Press A while on full red or full white to cycle Green and Blue (or some other simple input scheme that doesn't lose the instant, D-right, to cycle red/white)
4. Press A while on grid to bring up overscan test with default to 1 pixel L/R, 7 pixels top bottom.
[...]
5. Press A while on black level to bring up a an eye candy screen.
[...]
6. Press B while black level to cycle a focus test screen, just white dots on black and black dots on white; or sub dots for text.

I wonder what the upstream developer would have to say about these UI changes.

SpiderWaffle wrote:
Also original over-scan screen would be nice to have the pixels outside of the grey box all be white rather than everything outside of 0 0 0 0 box is also same grey, because then it's hard to tell your edge with 0 or less.

I hadn't considered that. But I expect a bit of "Why is there white when it's 0?" confusion. Making it black instead might cause confusion on PAL systems, which draw the border as solid black along with 1 top and 2 left and right pixels.

SpiderWaffle wrote:
Something like a half/half of these two screens below would be awesome and/or a mashup of the NES characters people are most familiar with like: Belmont, Mario(s), Megman, Samus, Link, Little Mac, ect.
https://images.craigslist.org/00w0w_dk7 ... 00x450.jpg
https://images.craigslist.org/00l0l_6iG ... 00x450.jpg

I'd prefer not to include anything copyrighted by control-freak publishers. That's why I replaced the graphics in several of the tests.

SpiderWaffle wrote:
Ways to make the color bleed screen better:
The horizontal stripes are great now, but White is the most important, would want to check white bleed on ALL parts of the screen.

If you mean something other than what "Full screen stripes" does, I'd like to see a mock screenshot of what you want.


Top
 Profile  
 
 Post subject: Re: 240p test suite
PostPosted: Thu Apr 26, 2018 2:27 pm 
Offline

Joined: Wed Nov 02, 2016 5:54 pm
Posts: 14
Quote:
If you mean something other than what "Full screen stripes" does, I'd like to see a mock screenshot of what you want.

Basically that, but cutting out half of the lines in blocks of about 5, so it doesn't put too much load on the CRT at once and skew the results, also being able to toggle to Red, Green, Blue lines.
like this image below but repeated all the way down.
https://photos.app.goo.gl/O4QT8BSPTyPCP9wg1

Quote:
I hadn't considered that. But I expect a bit of "Why is there white when it's 0?"

For me and some other friends we had the opposite confusion of why is there no border when I have the overscan set to 0 or less and I only see a defined edge with less overscan and why are there two areas of grey and one of white and which one is real border of the now TWO defined edges.

Quote:
I wonder what the upstream developer would have to say about these UI changes.

Probably not for them because they want to put in tons of these superfluous test and options, much better to do that with pages of indexed items, also easier for first time users to see the name of the test before they select it each time.

Quote:
I'd prefer not to include anything copyrighted by control-freak publishers. That's why I replaced the graphics in several of the tests.

I suppose that's true, rom hack generally don't provide an actual rom but rather a patch which you need a 3rd party software to patch an "illegal rom" with. It wouldn't be in the same boat. I wonder if something of a similar vien could be used though, like the bricks with leafs and text from CVIII name select screen with some other colorful pixel art thrown in. Are there just free assists of good colorful pixel part that could be imported?


Top
 Profile  
 
 Post subject: Re: 240p test suite
PostPosted: Thu Apr 26, 2018 3:29 pm 
Online

Joined: Sun Sep 19, 2004 11:12 pm
Posts: 20067
Location: NE Indiana, USA (NTSC)
Patches are welcome, especially if nobody has seconded the development of a new feature such as linking the different test patterns together via some state machine.


Top
 Profile  
 
 Post subject: Re: 240p test suite
PostPosted: Wed May 09, 2018 10:51 pm 
Online

Joined: Sun Sep 19, 2004 11:12 pm
Posts: 20067
Location: NE Indiana, USA (NTSC)
Now on GitHub: pinobatch/240p-test-mini

See also port to Game Boy


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 161 posts ]  Go to page Previous  1 ... 7, 8, 9, 10, 11

All times are UTC - 7 hours


Who is online

Users browsing this forum: No registered users and 3 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group