It is currently Sun Oct 22, 2017 4:04 pm

All times are UTC - 7 hours





Post new topic Reply to topic  [ 6 posts ] 
Author Message
 Post subject: NESRGB IGR PCBs for sale
PostPosted: Sat Mar 18, 2017 8:14 am 
Offline

Joined: Fri Jul 04, 2014 2:34 pm
Posts: 292
Location: Germany
Since I modded my AV Famicom with etim's NESRGB board and I didn't want to install a switch I decided to go for a switchless version made by borti4938 on a German forum.

They're fully assembled and soldered to work with AV Famicom but can be modified to work with a NES as well.
To do that, simply change the location of the 10k Ohm SMD resistor from low to high depending on the console you're using. This is needed for the reset type (active low or active high reset type).


Installation:
- Solder the pin headers with the same name (1,2,3,GND) on the NESRGB palette pads (1,2,3,GND).
- Cut track from the reset button and connect the reset button to Rst. In found on the NESRGB IGR board.
- Rst. Out goes to the reset output coming from your NESRGB IGR board (the line above your cut).
- Connect Clock, Latch, Data to controller port 1 (as seen in the picture)
- Additionally you can also add a R/G LED (3mm or 5mm, whichever you prefer) with common cathode.
- Everything else can be connected as labeled in the picture below (credits to its respective owner).

Usage:
Pressing start: Start+Select+A+B pressed for <2s = short reset
Pressing start: Start+Select+A+B pressed for >2s = long reset (Goes to Menu of ED or PowerPak, if used)
Pressing start: Start+Select+Right = Cycle forwards through palettes
Pressing start: Start+Select+Left = Cycle backwards through palettes

Since I have 8 PCBs left and no use for them, I'd offer them to you for 3€ per board.
Shipping costs are 3,70€ without tracking and 6,50€ with tracking + insurance.

If you have any questions, feel free to PM me.


Attachments:
NES-RGB_IGR-PCB_zpsafc47be0.jpg
NES-RGB_IGR-PCB_zpsafc47be0.jpg [ 162.49 KiB | Viewed 1232 times ]
NESRGB-IGR.JPG
NESRGB-IGR.JPG [ 1.07 MiB | Viewed 1232 times ]


Last edited by Ice Man on Fri Jun 23, 2017 2:50 pm, edited 1 time in total.
Top
 Profile  
 
PostPosted: Fri Apr 07, 2017 8:17 am 
Offline

Joined: Fri Apr 07, 2017 8:14 am
Posts: 1
do those prices cover shipping to the US? could really use one for my AV Famicom. i installed the palette switch, but want the IGR for my ED.


Top
 Profile  
 
PostPosted: Mon Apr 10, 2017 11:42 am 
Offline

Joined: Fri Jul 04, 2014 2:34 pm
Posts: 292
Location: Germany
Yes, 3,70€ without tracking and 6,50€ with tracking is shipping costs world wide.


Top
 Profile  
 
PostPosted: Mon Jun 19, 2017 6:56 am 
Offline
User avatar

Joined: Wed Jul 27, 2005 9:46 am
Posts: 46
Location: Spain
Can I ask for two? I would mod both an AV famicom and a NES.

_________________
Run, you fools!


Top
 Profile  
 
PostPosted: Mon Jun 19, 2017 9:18 am 
Offline

Joined: Fri Jul 04, 2014 2:34 pm
Posts: 292
Location: Germany
PM sent. :)


Top
 Profile  
 
PostPosted: Sun Jun 25, 2017 6:33 am 
Offline

Joined: Sun Jun 25, 2017 6:30 am
Posts: 1
Pm sent! :)


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 6 posts ] 

All times are UTC - 7 hours


Who is online

Users browsing this forum: No registered users and 3 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group