Hey guys!
I have a problem:
I want to make a german Earthbound cart with an INL board and the patched game is 6MB big.
The english 4MB version runs perfect on a 4MB INL board,
but there is no 6MB board, so it needs to be padded/expanded.
I couldn't run any 6-8MB game on my INL boards...
so i guess my expander (lunarexpand) doesn't work for this.
the game runs in emulators (6mb and 8mb padded version).
but in the original console i only get a black screen.
the rom is region fixed and cracked via ukon64.
any help would be nice!
INL Board - Earthbound German Patch
Moderators: B00daW, Moderators
Forum rules
1. NO BLATANT PIRACY. This includes reproducing homebrew less than 10 years old, with the exception of free software.
2. No advertising your reproductions, with the exception of free software.
3. Be nice. See RFC 1855 if you aren't sure what this means.
1. NO BLATANT PIRACY. This includes reproducing homebrew less than 10 years old, with the exception of free software.
2. No advertising your reproductions, with the exception of free software.
3. Be nice. See RFC 1855 if you aren't sure what this means.
Re: INL Board - Earthbound German Patch
Too little information. What board is it?? Any photos?? What patch are you applying on the rom?? What memories are you using??
As long as I'm concerned, games exceeding 4MB size are considered ExHIROM games and I'm ASSUMING the ROMs' /OE pins are connected wrong to the MAD-1 on the board since in case of ExHIROM games, they have to be reversed (/OE of first ROM has to go to MAD-1 pin #01 and /OE of the 2nd ROM has to go to MAD-1 pin #16, swapping the ROMs on the board may also fix the problem) but I'm not sure of that unless you provide us more information about your project
As long as I'm concerned, games exceeding 4MB size are considered ExHIROM games and I'm ASSUMING the ROMs' /OE pins are connected wrong to the MAD-1 on the board since in case of ExHIROM games, they have to be reversed (/OE of first ROM has to go to MAD-1 pin #01 and /OE of the 2nd ROM has to go to MAD-1 pin #16, swapping the ROMs on the board may also fix the problem) but I'm not sure of that unless you provide us more information about your project
-
- Posts: 8
- Joined: Fri Jan 09, 2015 2:17 pm
Re: INL Board - Earthbound German Patch
i use all new Infinit NES Lives . com boards.
and its the patch: EarthBound (Mother 2) [f][T+Ger1.20_Spade]
and its the patch: EarthBound (Mother 2) [f][T+Ger1.20_Spade]
Re: INL Board - Earthbound German Patch
"In emulators" — snes9x and zsnes aren't a valid verification. Does it work in bsnes=higan?
Re: INL Board - Earthbound German Patch
What are "Infinit NES Lives . com" boards??? What exact board are you using?? Any photo or exact info please....
Re: INL Board - Earthbound German Patch
Probably one of the Hi/LoROM boards. Which capacity did you order?MaarioS wrote:What are "Infinit NES Lives . com" boards???
Just for poops and grins, I've attached 6 MB and 8 MB test ROMs that display the mapping that your uploader is producing. Try writing each of them to your card.
Code: Select all
008=081 400=080 408=081
018=083 410=082 418=083
028=085 420=084 428=085
038=087 430=086 438=087
808=001 C00=000 C08=001
818=003 C10=002 C18=003
828=005 C20=004 C28=005
838=007 C30=006 C38=007
- Attachments
-
- hsbm_exhirom.sfc.zip
- (35.19 KiB) Downloaded 155 times
-
- Posts: 8
- Joined: Fri Jan 09, 2015 2:17 pm
Re: INL Board - Earthbound German Patch
i have 4MB and 8MB boards.
earthbound patched in german is 6MB big, so i have to pad them to 8MB
i can get lorom games to work with the latest firmware (they are automirrored)
but hirom don't have that support yet
earthbound patched in german is 6MB big, so i have to pad them to 8MB
i can get lorom games to work with the latest firmware (they are automirrored)
but hirom don't have that support yet
Re: INL Board - Earthbound German Patch
From that picture, it appears you'll have to swap the first 4 MB with the second 4 MB.