Ive made a repro of Jason vs Freddy. Cool Friday the 13th hack.http://bootgod.dyndns.org:7777/profile.php?id=176 Ive made sure the mirroring is correct and checked all traces. mirroring set to Vertical. Everything looks fine with the cart and solder. Used two M27C512 eproms(x2 prg, chr). Q Bert as the donor.http://bootgod.dyndns.org:7777/profile.php?id=110
The game plays fine but one the left and right of the screen its glitching out. Ill share video with my phone in a few. Easy than explain it. Any ideas please help. Thanks.
Video soon:
Scolling glitches on repro
Moderators: B00daW, Moderators
Forum rules
1. NO BLATANT PIRACY. This includes reproducing homebrew less than 10 years old, with the exception of free software.
2. No advertising your reproductions, with the exception of free software.
3. Be nice. See RFC 1855 if you aren't sure what this means.
1. NO BLATANT PIRACY. This includes reproducing homebrew less than 10 years old, with the exception of free software.
2. No advertising your reproductions, with the exception of free software.
3. Be nice. See RFC 1855 if you aren't sure what this means.
Re: Scolling glitches on repro
Did you jumper the H pads?
IIRC the way Nintendo did it is a bit backwards from what you'd think. H is soldered closed for Vertical mirror, and V for Horizontal.
IIRC the way Nintendo did it is a bit backwards from what you'd think. H is soldered closed for Vertical mirror, and V for Horizontal.
Re: Scolling glitches on repro
That is the issue! Thanks. Rookie mistake again:p