Hello!, first, sorry for the bad english, i want to do a Biohazard repro, is a bootleg game for the famiclone, my questions are:
_Its posible to change a mapper for another?, i have two roms, one in 015 mapper and another in 227, the only posible donor i found is the Contra 100 in 1 multicart, but the pcb has not battery.
_How i can add a battery on the pcb?
Thank you for your time
Biohazard famicom repro, help needed
Moderators: B00daW, Moderators
Forum rules
1. NO BLATANT PIRACY. This includes reproducing homebrew less than 10 years old, with the exception of free software.
2. No advertising your reproductions, with the exception of free software.
3. Be nice. See RFC 1855 if you aren't sure what this means.
1. NO BLATANT PIRACY. This includes reproducing homebrew less than 10 years old, with the exception of free software.
2. No advertising your reproductions, with the exception of free software.
3. Be nice. See RFC 1855 if you aren't sure what this means.
Re: Biohazard famicom repro, help needed
Mapper hacks are possible in theory, but you have to go through the whole program and change every place it writes to the mapper.
Re: Biohazard famicom repro, help needed
And that's obviously assuming that the target mapper is equivalent or superior to the original mapper.
- krzysiobal
- Posts: 1036
- Joined: Sun Jun 12, 2011 12:06 pm
- Location: Poland
- Contact:
Re: Biohazard famicom repro, help needed
Bio Hazard on mapper 15 will not work. BioHazard should not be assigned mapper 15 as it hangs on it, due to difference in banking. There is fixed version on mapper 227 (there difference is NOT only assigning other mapper number). If you want PCB for mapper 227, contact me on PM.