shvc-BA3m-20 rom splitting question

A place that you can discuss reproduction of classic titles or "licensed-for-reproduction" homebrew for personal use.

Moderators: B00daW, Moderators

Forum rules
1. NO BLATANT PIRACY. This includes reproducing homebrew less than 10 years old, with the exception of free software.
2. No advertising your reproductions, with the exception of free software.
3. Be nice. See RFC 1855 if you aren't sure what this means.
Post Reply
majorspawn
Posts: 20
Joined: Fri Aug 04, 2017 6:39 am

shvc-BA3m-20 rom splitting question

Post by majorspawn »

Gents,

If I use a Jap cart with a SHVC-BA3M board like pictured below.
Image
or
Image


Assuming PO is a 16M rom and P1 is 8 Meg rom giving total of 24Meg for Metroid and both boards above are identical.

Q1. How do i split a Metroid rom which i presume is 24 meg into 2 parts (2 meg and a 1 meg) Wanting to burn the images to a AM29F016B (adapter v3) and a M27C801.

Q2. Do i need to bin swap the rom file for M27C801 and just cross over 24&31?

any suggestions would be fantastic as I dont want to use up 2 x AM29F016B

Thanks
MS
Post Reply