Gents,
If I use a Jap cart with a SHVC-BA3M board like pictured below.
or
Assuming PO is a 16M rom and P1 is 8 Meg rom giving total of 24Meg for Metroid and both boards above are identical.
Q1. How do i split a Metroid rom which i presume is 24 meg into 2 parts (2 meg and a 1 meg) Wanting to burn the images to a AM29F016B (adapter v3) and a M27C801.
Q2. Do i need to bin swap the rom file for M27C801 and just cross over 24&31?
any suggestions would be fantastic as I dont want to use up 2 x AM29F016B
Thanks
MS
shvc-BA3m-20 rom splitting question
Moderators: B00daW, Moderators
Forum rules
1. NO BLATANT PIRACY. This includes reproducing homebrew less than 10 years old, with the exception of free software.
2. No advertising your reproductions, with the exception of free software.
3. Be nice. See RFC 1855 if you aren't sure what this means.
1. NO BLATANT PIRACY. This includes reproducing homebrew less than 10 years old, with the exception of free software.
2. No advertising your reproductions, with the exception of free software.
3. Be nice. See RFC 1855 if you aren't sure what this means.