It is currently Thu Dec 13, 2018 11:09 am

All times are UTC - 7 hours

Forum rules

1. NO BLATANT PIRACY. This includes reproducing homebrew less than 10 years old, with the exception of free software.
2. No advertising your reproductions, with the exception of free software.
3. Be nice. See RFC 1855 if you aren't sure what this means.

Post new topic Reply to topic  [ 3 posts ] 
Author Message
PostPosted: Thu Nov 09, 2017 11:39 pm 

Joined: Fri Aug 04, 2017 6:39 am
Posts: 20
Hi Gents,
I was wondering if anyone has successfully converted a RMX2 to a MMX2 cart by using 2 X 27c801's or 1 X 27c801 + 27c401? ( the game is 12Mbits)
The input on the on board chips is using a 8Mbit LH538LN4 and a 4Mbit LH534BN2. My understanding is that the pinout of the chips is the same as super FX
So I followed that approach after successfully using it with Starfox 2. What I have attempted is splitting the rom using filesplitter to a 1MB and 512KB file, fixing the checksum, expanding the 512kb to 1M and writing to the 2 X 801s. I have wired as per the super FX pinout. Now I get the Capcom splash intro and the very beginning but then a black screen, the same behavior if I run the 1st part 1MB on an emulator only. Which sort of gives me an impression the second chips is not being addressed etc. I was originally going to use a 401 for the second chip to make it exactly 12Mbits but the 401 does not have an A19 on pin 1 so essentially I have no where to connect this line. Has anyone successfully got this working, if so could I please get some clarification on the best approach? Thanks in advance

PostPosted: Mon May 28, 2018 10:50 am 

Joined: Fri Dec 14, 2012 2:13 am
Posts: 13
Could not get it going that way personally. Could have been my poor wiring or board damage though... tried both a 512 and 1mb with and then without proper mirroring on the second half and couldnt get it going. Eventually figured out wiring for a 29f033c though.

PostPosted: Tue Jul 24, 2018 9:23 pm 

Joined: Sat May 05, 2018 9:00 am
Posts: 8
hi everyone , i've made a homemade copy of x2+x3 multicart using a 29L3211 (3.3v) and a new adapter that i've created only for using in a x2 donor.


but for using this guy needs to edit hex o x2 ROM

works like a charm.

Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 3 posts ] 

All times are UTC - 7 hours

Who is online

Users browsing this forum: No registered users and 2 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group