TKROM board reproduction

A place that you can discuss reproduction of classic titles or "licensed-for-reproduction" homebrew for personal use.

Moderators: B00daW, Moderators

Forum rules
1. NO BLATANT PIRACY. This includes reproducing homebrew less than 10 years old, with the exception of free software.
2. No advertising your reproductions, with the exception of free software.
3. Be nice. See RFC 1855 if you aren't sure what this means.
Post Reply
eggman
Posts: 8
Joined: Thu Jul 13, 2017 12:23 am

TKROM board reproduction

Post by eggman »

I have put sockets in a TKROM board (Shadowgate). Now, when I put Shadowgate on the Eproms everything works fine. So, the soldering should be ok. However, if I put either Kirby or Mario Adventure on the Eproms, I get a very glitchy graphic. The game plays but only very glitchy. Does anybody have an idea how that can be?
User avatar
Fisher
Posts: 1249
Joined: Sat Jul 04, 2015 9:58 am
Location: -29.794229 -55.795374

Re: TKROM board reproduction

Post by Fisher »

Could you please post some pictures?
For what you've said, it seems like a problem with the CHR's A17 line.
eggman
Posts: 8
Joined: Thu Jul 13, 2017 12:23 am

Re: TKROM board reproduction

Post by eggman »

Many thanks. You guessed almost correct. It was A16 that had a loose connection.
Thanks for your help!
Post Reply