TKROM board reproduction
Moderators: B00daW, Moderators
Forum rules
1. NO BLATANT PIRACY. This includes reproducing homebrew less than 10 years old, with the exception of free software.
2. No advertising your reproductions, with the exception of free software.
3. Be nice. See RFC 1855 if you aren't sure what this means.
1. NO BLATANT PIRACY. This includes reproducing homebrew less than 10 years old, with the exception of free software.
2. No advertising your reproductions, with the exception of free software.
3. Be nice. See RFC 1855 if you aren't sure what this means.
TKROM board reproduction
I have put sockets in a TKROM board (Shadowgate). Now, when I put Shadowgate on the Eproms everything works fine. So, the soldering should be ok. However, if I put either Kirby or Mario Adventure on the Eproms, I get a very glitchy graphic. The game plays but only very glitchy. Does anybody have an idea how that can be?
Re: TKROM board reproduction
Could you please post some pictures?
For what you've said, it seems like a problem with the CHR's A17 line.
For what you've said, it seems like a problem with the CHR's A17 line.
Re: TKROM board reproduction
Many thanks. You guessed almost correct. It was A16 that had a loose connection.
Thanks for your help!
Thanks for your help!