Mitsume ga Tooru DIY

A place that you can discuss reproduction of classic titles or "licensed-for-reproduction" homebrew for personal use.

Moderators: B00daW, Moderators

Forum rules
1. NO BLATANT PIRACY. This includes reproducing homebrew less than 10 years old, with the exception of free software.
2. No advertising your reproductions, with the exception of free software.
3. Be nice. See RFC 1855 if you aren't sure what this means.
Post Reply
Posts: 8
Joined: Tue Mar 17, 2020 4:51 am

Mitsume ga Tooru DIY

Post by snezzdev » Thu Mar 26, 2020 1:48 am

I want to make Mitsume ga Tooru game using famicom donor cart.
Here is some info
I see there 2 memory ICs. 23C1010BCZ T06 and 23C1013BCZ W90
Am i correct that i need to replace both of them ? Which modern memory ICs should i use to replace them ?

User avatar
Posts: 7963
Joined: Fri Nov 12, 2004 2:49 pm
Location: Chexbres, VD, Switzerland

Re: Mitsume ga Tooru DIY

Post by Bregalad » Thu Mar 26, 2020 1:53 am

Stop butchering rare games and use a flash card.

Posts: 22090
Joined: Sun Sep 19, 2004 11:12 pm
Location: NE Indiana, USA (NTSC)

Re: Mitsume ga Tooru DIY

Post by tepples » Thu Mar 26, 2020 7:45 am

Moved to Reproduction.

I understand it as wanting to make a reproduction of Mitsume ga Tooru, a TLROM game, on some random donor board. There are probably dozens of common TLROM games whose board would be compatible.

I don't know where snezzdev is located, but not all countries have affordable EverDrive/PowerPak-style CF/SD adapter flash carts. Some even lay prohibitive import duties on single-game flash carts from Infinite NES Lives and the like.

Both chips are 128Kx8-bit mask ROMs. You'll need something like a 29F010 or 39SF010A to replace them on the TLROM donor that you have chosen.

Post Reply