SNES M27C801 2in1 HiRom games - Diagram for Flip-flop 74HC74

A place that you can discuss reproduction of classic titles or "licensed-for-reproduction" homebrew for personal use.

Moderators: B00daW, Moderators

Forum rules
1. NO BLATANT PIRACY. This includes reproducing homebrew less than 10 years old, with the exception of free software.
2. No advertising your reproductions, with the exception of free software.
3. Be nice. See RFC 1855 if you aren't sure what this means.
Kayumba
Posts: 34
Joined: Sun Mar 01, 2020 2:36 am

Re: SNES M27C801 2in1 HiRom games - Diagram for Flip-flop 74HC74

Post by Kayumba » Thu May 28, 2020 2:39 pm

lidnariq wrote:
Thu May 28, 2020 2:21 pm
Have you already made a reproduction without using the 74'74?
yes
lidnariq wrote:
Thu May 28, 2020 2:21 pm
If so, what did you do there?
For Hirom
My pin30 of 27C801 (originally A17) connected to pad 44 of PCB (which is A19)

For LoROM
My pin30 of 27C801 (originally A17) connected to pad 45 of PCB (which is A19)

After SWAP BIN method, pin30 of 27C801 digitally became A19.

So when you said :
"the 74'74 should be connected to A19"
My question is to confirm that you are talking about A19 of 27C801 (pin1) or after SWAP BIN method A19 = pin30 ?

lidnariq
Posts: 9383
Joined: Sun Apr 13, 2008 11:12 am
Location: Seattle

Re: SNES M27C801 2in1 HiRom games - Diagram for Flip-flop 74HC74

Post by lidnariq » Thu May 28, 2020 2:44 pm

The pin that is functionally used as A19, to distinguish between the first half and the second half of the data you programmed.


(that is, pin 30)

Kayumba
Posts: 34
Joined: Sun Mar 01, 2020 2:36 am

Re: SNES M27C801 2in1 HiRom games - Diagram for Flip-flop 74HC74

Post by Kayumba » Thu May 28, 2020 2:48 pm

lidnariq wrote:
Thu May 28, 2020 2:44 pm
The pin that is functionally used as A19, to distinguish between the first half and the second half of the data you programmed.


(that is, pin 30)
If so, you talking about pin30 of 27C801 (originally A17 => became A19 after swap method).
I will try to do some test this week-end.

Kayumba
Posts: 34
Joined: Sun Mar 01, 2020 2:36 am

Re: SNES M27C801 2in1 HiRom games - Diagram for Flip-flop 74HC74

Post by Kayumba » Fri May 29, 2020 2:35 pm

Thank you

Kayumba
Posts: 34
Joined: Sun Mar 01, 2020 2:36 am

Re: SNES M27C801 2in1 HiRom games - Diagram for Flip-flop 74HC74

Post by Kayumba » Sat May 30, 2020 4:22 pm

Yes It's WORK!
Thank's.
Here is final diagram of LoROM/HiROM 2in1 games - for Flip-flop 74HC74 and M27C801
Image

Post Reply