27C801 without SWAP BIN

A place that you can discuss reproduction of classic titles or "licensed-for-reproduction" homebrew for personal use.

Moderators: B00daW, Moderators

Forum rules
1. NO BLATANT PIRACY. This includes reproducing homebrew less than 10 years old, with the exception of free software.
2. No advertising your reproductions, with the exception of free software.
3. Be nice. See RFC 1855 if you aren't sure what this means.
Post Reply
Kayumba
Posts: 87
Joined: Sun Mar 01, 2020 2:36 am

27C801 without SWAP BIN

Post by Kayumba » Tue Sep 01, 2020 12:18 pm

Hi,

Can we use .SMC file to program 27C801 without doing SWAP BIN ?

If I keep all pin outputs like in schema :
Will it works ? Or we allaways have to do SWAP BIN method ?

Image

27C801 pin1 = > 44 (A19) HiROM , 45 (A19) LoROM
27C801 pin2 = > 41 (A16) HiROM , 42 (A19) LoROM
27C801 pin3 = > 40 (A15) HiROM , 41 (A15) LoROM
27C801 pin30 = > 42 (A17) HiROM , 43 (A17) LoROM
27C801 pin31 = > 43 (A18) HiROM , 44 (A18) LoROM

And about pin 24 i'am not sure...
27C801 pin24 = > ? HiROM , ? LoROM

Where is *OE ? on cartridge pins?
Is it pin 23 (/RD) ?
Top
Kayumba
Posts: 87
Joined: Sun Mar 01, 2020 2:36 am

Re: 27C801 without SWAP BIN

Post by Kayumba » Thu Sep 17, 2020 10:31 pm

If some one are need this informations :
M27C801 pin 24 (/OE) -----> Cartridge connector pin 23 (/RD)
Or
M27C801 pin 24 (/OE) -----> Cartridge connector pin 49 (/OE)
Two version will works.
Top
Post Reply

Return to “Reproduction”