Hi, I wonder if someone more experienced than me could give me some advice in opening Bandai carts like the dragon ball z ones
I managed to open without damage lot of carts with the proper tool but these banday carts damn seem superglued together
Wonder if they got some screw under label or different tabs
Thanks for help
Opening Bandai Famicom carts
Moderators: B00daW, Moderators
Forum rules
1. NO BLATANT PIRACY. This includes reproducing homebrew less than 10 years old, with the exception of free software.
2. No advertising your reproductions, with the exception of free software.
3. Be nice. See RFC 1855 if you aren't sure what this means.
1. NO BLATANT PIRACY. This includes reproducing homebrew less than 10 years old, with the exception of free software.
2. No advertising your reproductions, with the exception of free software.
3. Be nice. See RFC 1855 if you aren't sure what this means.
-
krzysiobal
- Posts: 829
- Joined: Sun Jun 12, 2011 12:06 pm
- Location: Poland
Re: Opening Bandai Famicom carts
No, just ordinary clips on the upper part of shell. Squeeze upper part with clamp.
Because the center bolt hoes all the way up to the PCB and there is almost zero play for it to bend when opening,there is high chance you will break the center pin.
Because the center bolt hoes all the way up to the PCB and there is almost zero play for it to bend when opening,there is high chance you will break the center pin.
- Attachments
-
-
-
-
Re: Opening Bandai Famicom carts
Thanks for tip I managed to open it!
I had to use little flat screwdriver to open tabs the clamp was not enough
I cutted with hand saw the center bolt in order to save top label
I had to use little flat screwdriver to open tabs the clamp was not enough
I cutted with hand saw the center bolt in order to save top label
- Attachments
-
-