Acclaim 51555 PCB compatibility
Moderators: B00daW, Moderators
Forum rules
1. NO BLATANT PIRACY. This includes reproducing homebrew less than 10 years old, with the exception of free software.
2. No advertising your reproductions, with the exception of free software.
3. Be nice. See RFC 1855 if you aren't sure what this means.
1. NO BLATANT PIRACY. This includes reproducing homebrew less than 10 years old, with the exception of free software.
2. No advertising your reproductions, with the exception of free software.
3. Be nice. See RFC 1855 if you aren't sure what this means.
- nintendo2600
- Posts: 367
- Joined: Mon Mar 30, 2009 4:40 pm
Acclaim 51555 PCB compatibility
Hey All,
Been a while since I posted here but I knew this was the place to go for my question. I'm wondering is the Acclaim 51-555 PCB (TK-ROM MMC3 CLONE) pin for pin correct with a standard EPROM or does it need some address lines rerouted like on a real TKROM nintendo brand board?
Thanks in Advance,
Shawn
Been a while since I posted here but I knew this was the place to go for my question. I'm wondering is the Acclaim 51-555 PCB (TK-ROM MMC3 CLONE) pin for pin correct with a standard EPROM or does it need some address lines rerouted like on a real TKROM nintendo brand board?
Thanks in Advance,
Shawn
- nintendo2600
- Posts: 367
- Joined: Mon Mar 30, 2009 4:40 pm
Bregalad to rescue as normal. Looks like things are all the same still here at NesDev! Thanks man!Bregalad wrote:I'm 99% sure it is pin standard for EPROMs, like most non-Nintendo made boards. The only exepction seems to be some USA Konami boards which are like Nintendo's, while Japanese Konami boards uses standard EPROMs pinout.
Re: Acclaim 51555 PCB compatibility
I apologize for bringing this back from the dead, but I was curious if there was any 100% confirmation on this?
I ask because I have socketed my Roger Clemens PCB (with the 51555-2 board) and have been unsuccessful in my attempts to get a standard 27c020 to boot.
Thanks!
I ask because I have socketed my Roger Clemens PCB (with the 51555-2 board) and have been unsuccessful in my attempts to get a standard 27c020 to boot.
Thanks!
Re: Acclaim 51555 PCB compatibility
Solved this myself, and the above information is correct, the PCB is a direct drop in EPROM replacement.
-
- Posts: 45
- Joined: Mon Feb 04, 2013 8:48 am
Re: Acclaim 51555 PCB compatibility
This rings true of all U.S. Acclaim PCB's? Sounds like I've got a new favorite platform for test cartridges!
-
- Posts: 45
- Joined: Mon Feb 04, 2013 8:48 am
Re: Acclaim 51555 PCB compatibility
Also confirmed. I had Mortal Kombat running on this:
Re: Acclaim 51555 PCB compatibility
That brings things full circle: a pirate 8-bit port of a game to which Acclaim held the 16-bit port rights, running on an Acclaim board.
-
- Posts: 45
- Joined: Mon Feb 04, 2013 8:48 am
Re: Acclaim 51555 PCB compatibility
The soda that just blew out my nose is all over my keyboard...tepples wrote:That brings things full circle: a pirate 8-bit port of a game to which Acclaim held the 16-bit port rights, running on an Acclaim board.
- nintendo2600
- Posts: 367
- Joined: Mon Mar 30, 2009 4:40 pm
Re: Acclaim 51555 PCB compatibility
And now the world is perfecttepples wrote:That brings things full circle: a pirate 8-bit port of a game to which Acclaim held the 16-bit port rights, running on an Acclaim board.
-
- Posts: 45
- Joined: Mon Feb 04, 2013 8:48 am
Re: Acclaim 51555 PCB compatibility
Not as perfect as I thought. PRG works perfectly, CHR has corruption. the tiles are THERE, but all messed up.
- nintendo2600
- Posts: 367
- Joined: Mon Mar 30, 2009 4:40 pm
Re: Acclaim 51555 PCB compatibility
Those pcb lines break really easy as those boards are VERY low quality. I'd check your connections on the chr lines and\or reburn your chr chip.GameMachineJames wrote:Not as perfect as I thought. PRG works perfectly, CHR has corruption. the tiles are THERE, but all messed up.
-
- Posts: 45
- Joined: Mon Feb 04, 2013 8:48 am
Re: Acclaim 51555 PCB compatibility
Bit of a L8L8L8 bump. But I just re-did it with a newer PCB.
Turns out, the 5155 PCB's with the Nintendo MMC3 -ARE- wired for EPROMs.
The 5155's with the cloned MMC3 are wired for EPROMs on the PRG, but the CHR side still needs some rewiring.
Just played Bio Force Ape on my shiny new test cart!
Turns out, the 5155 PCB's with the Nintendo MMC3 -ARE- wired for EPROMs.
The 5155's with the cloned MMC3 are wired for EPROMs on the PRG, but the CHR side still needs some rewiring.
Just played Bio Force Ape on my shiny new test cart!
-
- Posts: 13
- Joined: Tue Feb 16, 2016 8:22 pm
Re: Acclaim 51555 PCB compatibility
Sorry to necrobump, but do you happen to have any more information on this? I have a few of these boards and would love to put them to some use.GameMachineJames wrote:The 5155's with the cloned MMC3 are wired for EPROMs on the PRG, but the CHR side still needs some rewiring.
On 53361-2 (MC-ACC), I can get it to boot a game, but the CHR side is corrupt. I have no issues with 51555-2 (MMC3B). Both are Roger Clemens MVP donors.
I'm using one 27C020 each for CHR and PRG (Mega Man 5), with 256k files in each. Some of the graphics and text look fine, but some are corrupt. I've read that this PCB may be compatible with 27C101, and the only difference (from what I can tell) is pin 30 on a 27c101 is NC whereas it's A17 on a 27c020.
The other thing I noticed is that anything using the ACCLAIM-MC-ACC maxes out at 384Kb combined (the PRG+CHR I'm using is 512Kb). Could this have anything to do with it?
The first obvious difference I noticed was:
53361-2: pin Q0 (Eprom 13) -> cart pins 34 (CIC toPak) & 30 (PPU D0)
51555-2: pin Q0 (Eprom 13) -> cart pin 30 (PPU D0) only
53361-2: CIC pin 2 -> cart pins 34 (CIC toPak) & 30 (PPU D0)
51555-2: CIC pin 2 -> cart pin 34 (CIC toPak)
I matched up the wiring (as best I could) on the 53361-2 to match the 51555-2, but no change. PRG seems to work, but tiles are still missing from the CHR.
Any help is appreciated!
edit: I tried using Bonk's Adventure (another MMC3 TLROM) and same issue. It mostly works, but some tiles are missing. Is there any way to know if the issue is MC-ACC boards are trash or if it's the fact that I'm using 27C020 EPROMs? I may have some 27C101s to test with..?
Last edited by genepensive on Sun Apr 16, 2017 9:59 pm, edited 1 time in total.
-
- Posts: 13
- Joined: Tue Feb 16, 2016 8:22 pm
Re: Acclaim 51555 PCB compatibility
What EPROMs did you use?GameMachineJames wrote:Also confirmed. I had Mortal Kombat running on this: