Famicom AV, PAL NES & Dendy chips decapsulation (progress!)

Discuss emulation of the Nintendo Entertainment System and Famicom.

Moderator: Moderators

User avatar
Eugene.S
Posts: 317
Joined: Sat Apr 18, 2009 4:36 am
Location: UTC+3
Contact:

Famicom AV, PAL NES & Dendy chips decapsulation (progress!)

Post by Eugene.S »

Hi, nesdev!
I've contacted to http://zeptobars.ru/en/ project about half-year ago.

I gave to them some chips for decapsulation, and now we have first results.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Chips:

RP2A03H - Famicom AV "rev H" CPU
RP2C02H-0 - Famicom AV "rev H" PPU
RP2C07-0 - French version PAL NES PPU
(PPU itself output is standard composite signal, but finally converted to RGB by special decoder on NES mainboard)
Red/green emphasis bits are swapped.

UMC UA6527P - Hybrid ("Dendy") CPU made by "UMC". I know it has better DPCM, timbre and overall sound quality than TA-03NP1, but has 25%<->50% duty cycles swapped
UMC UA6538 - Hybrid ("Dendy") PPU made by "UMC". I've confirmed red/green emphasis swap on it. It has more saturated palette than TA02-NP-6538 and RP2C07-0.

TA-03NP1-6527P - Hybrid ("Dendy") CPU made by "TA". I know it has worse timbre and buggy DPCM than UMC UA6527P, but has right dutycycles
TA-02NP-6538 - Hybrid ("Dendy") PPU made by "TA". It has red/green emphasis bits also swapped, as well as RP2C07-0 and UA6538.
-------------------------------------------------------------------------------------------------------------------------------------------------------------

First photos of UMC UA6538 PPU:
METAL LAYER: http://s.zeptobars.ru/UMC-UA6538-HD.jpg
If everything is clear with the current view, and it can be properly reversed, zeptobars will remove metallization layer and go ahead to the polysilicon.
Last edited by Eugene.S on Sat Sep 19, 2015 2:31 pm, edited 16 times in total.
User avatar
HardWareMan
Posts: 209
Joined: Mon Jan 01, 2007 11:12 am

Re: Famicom AV and Dendy chips decapsulation (progress!)

Post by HardWareMan »

Awesome! I want to know the difference between that chips.
User avatar
Quietust
Posts: 1920
Joined: Sun Sep 19, 2004 10:59 pm
Contact:

Re: Famicom AV and Dendy chips decapsulation (progress!)

Post by Quietust »

The metal image for that PPU is a bit blurry compared to the image I used for Visual 2C02, but hopefully it should be good enough for tracing, especially since the "core" of the chip seems to be an almost exact clone of the RP2C02, with differences being mostly in the interconnects and the pin drivers.
Quietust, QMT Productions
P.S. If you don't get this note, let me know and I'll write you another.
User avatar
feos
Posts: 108
Joined: Tue Apr 19, 2011 11:26 am
Location: RU

Re: Famicom AV and Dendy chips decapsulation (progress!)

Post by feos »

Quietust wrote:The metal image for that PPU is a bit blurry compared to the image I used for Visual 2C02, but hopefully it should be good enough for tracing, especially since the "core" of the chip seems to be an almost exact clone of the RP2C02, with differences being mostly in the interconnects and the pin drivers.
Since further steps couldn't be undone, they guy who's doing the work needs absolute approval and confirmation. Your post is one, right?
User avatar
org
Posts: 155
Joined: Tue Aug 07, 2012 12:27 pm

Re: Famicom AV and Dendy chips decapsulation (progress!)

Post by org »

I found some stitching errors :

Image

But anyway this image looks suitable for reversing to me :)
barsmonster
Posts: 6
Joined: Wed Sep 02, 2015 9:19 am

Re: Famicom AV and Dendy chips decapsulation (progress!)

Post by barsmonster »

org wrote:I found some stitching errors :
That is exactly what I was afraid of. Can you show where on the die you've found this?
User avatar
org
Posts: 155
Joined: Tue Aug 07, 2012 12:27 pm

Re: Famicom AV and Dendy chips decapsulation (progress!)

Post by org »

Image
User avatar
feos
Posts: 108
Joined: Tue Apr 19, 2011 11:26 am
Location: RU

Re: Famicom AV and Dendy chips decapsulation (progress!)

Post by feos »

Google wrote:Forbidden That’s all we know.
User avatar
Eugene.S
Posts: 317
Joined: Sat Apr 18, 2009 4:36 am
Location: UTC+3
Contact:

Re: Famicom AV and Dendy chips decapsulation (progress!)

Post by Eugene.S »

I've dug up the roots - all the rivers flocking to TXC corporation:

Seems TXC "developed" first clone-chips itself in late 80s, and it was:
MG-P-501 (CPU) photo1
MG-P-502 (PPU) photo2
I need to find these chips for testing, and make 100% sure about hybrid or ntsc timings they have.
I know that some MicroGenius consoles was pure NTSC (6527+6528), but some have (6527P+6538) hybrids.

TXC also developed original games, like Journey to the West (Asia) (Unl)

I'm waiting for original RP2C07-0 to decap it too.
User avatar
org
Posts: 155
Joined: Tue Aug 07, 2012 12:27 pm

Re: Famicom AV and Dendy chips decapsulation (progress!)

Post by org »

Ugh :/

Image
User avatar
Eugene.S
Posts: 317
Joined: Sat Apr 18, 2009 4:36 am
Location: UTC+3
Contact:

Re: Famicom AV and Dendy chips decapsulation (progress!)

Post by Eugene.S »

Piroxilin just confirmed red\green emphasis bits swap on TA-02NP 6538.
So, it has same behaviour as RP2C07 and UMC version of hybrid PPU (UA6538).
I guessed famiclone chips was RP2C07 copied, + timings adjusted to be NTSC/PAL hybrid.

I've also confirmed emphasis bits swap on RP2C07-0
barsmonster
Posts: 6
Joined: Wed Sep 02, 2015 9:19 am

Re: Famicom AV, PAL NES & Dendy chips decapsulation (progres

Post by barsmonster »

Redid metal:

http://s.zeptobars.ru/UMC-UA6538-2.jpg
http://s.zeptobars.ru/UMC-UA6538-2-HD50.jpg
http://s.zeptobars.ru/UMC-UA6538-2-HD.jpg

HD50 - is half resolution (like it was before), HD - full resolution (0.25Gb).
Full resolution is exceeding optical resolution limit, so we probably not loosing much.
Pending sign-off for etch.
2600
Posts: 96
Joined: Tue Aug 07, 2007 10:28 am

Re: Famicom AV, PAL NES & Dendy chips decapsulation (progres

Post by 2600 »

I'm interested in seeing what the RP2A03H differences are.
User avatar
Eugene.S
Posts: 317
Joined: Sat Apr 18, 2009 4:36 am
Location: UTC+3
Contact:

Famicom AV, PAL NES & Dendy chips decapsulation (progress)

Post by Eugene.S »

Sure, but we need 2C07 first: http://www.qmtpro.com/~nes/chipimages/#rp2c07
The Visual6502 project has one of these chips depackaged, but no plans to delayer or photograph it have been announced.
And i'm personally interested to find differences between "Dendy" and official NES.
Timings of NTSC/PAL hybrid famiclones are unique. We need to do good research.
barsmonster
Posts: 6
Joined: Wed Sep 02, 2015 9:19 am

Re: Famicom AV, PAL NES & Dendy chips decapsulation (progres

Post by barsmonster »

barsmonster wrote:Redid metal:

http://s.zeptobars.ru/UMC-UA6538-2.jpg
http://s.zeptobars.ru/UMC-UA6538-2-HD50.jpg
http://s.zeptobars.ru/UMC-UA6538-2-HD.jpg

HD50 - is half resolution (like it was before), HD - full resolution (0.25Gb).
Full resolution is exceeding optical resolution limit, so we probably not loosing much.
Pending sign-off for etch.
Doh, on fresh eye found different stitching error :roll:
Post Reply