Ways to play Famicom games on an NES
Moderator: Moderators
Re: Ways to play Famicom games on an NES
Are games released in Australia PAL-A?
(I'm thinking specifically of Ufouria).
(I'm thinking specifically of Ufouria).
nesdoug.com -- blog/tutorial on programming for the NES
Re: Ways to play Famicom games on an NES
AVRciczz says region ";3197 - UK/Italy/Australia "
Re: Ways to play Famicom games on an NES
PAL A is UK, it's pretty common. I couldn't tell you how many I have though... since I don't have to worry about that, I don't pay attention Nowadays I'm always targeting NTSC releases (either US or Jap) though, as long as it's feasible without too steep custom fees.Bregalad wrote: Well I've yet to have seen any PAL-A game in real-life, period. Games seems to remain mostly domestic.
- FrankenGraphics
- Formerly WheelInventor
- Posts: 2064
- Joined: Thu Apr 14, 2016 2:55 am
- Location: Gothenburg, Sweden
- Contact:
Re: Ways to play Famicom games on an NES
SCN games fetch ridiculous prices here, which means NOE games are flooding this region to compensate. Games from uk and italy aren't as common here as the NOE ones have become, due to the CIC, but they can sometimes be cheaper to get.
Re: Ways to play Famicom games on an NES
A question for everybody who uses the original Famicom-to-NES converter by Nintendo by putting it into a shell where the top was sawed off:
How exactly do you use this?
This is how it's put into a cartridge: So, how do you put a Famicom game on top?
This only works if you turn around the converter by 180 degrees because of the attachments on the side or if the Famicom game doesn't have a shell by itself, as in the image.
How exactly do you use this?
This is how it's put into a cartridge: So, how do you put a Famicom game on top?
This only works if you turn around the converter by 180 degrees because of the attachments on the side or if the Famicom game doesn't have a shell by itself, as in the image.
My game "City Trouble":
Gameplay video: https://youtu.be/Eee0yurkIW4
Download (ROM, manual, artworks): http://www.denny-r-walter.de/city.html
Gameplay video: https://youtu.be/Eee0yurkIW4
Download (ROM, manual, artworks): http://www.denny-r-walter.de/city.html
- infiniteneslives
- Posts: 2104
- Joined: Mon Apr 04, 2011 11:49 am
- Location: WhereverIparkIt, USA
- Contact:
Re: Ways to play Famicom games on an NES
Most converters require the famicom front label to be facing down in the NES cartridge tray as you've mentioned. To keep the famicom label up you need a converter which 'flips' all the connections like I did with my design.
I didn't realize the tabs on the side of the gyromite connector would need sawed off as well as the famicom shell would prevent seating of the cart as you've also pointed out..
I imagine people who use it have to hack those tabs off, but then consequently can't easily attach it to an original case that's sawed in half. So they just use the bare adapter without case? Or they take the famicom board out of the case which is rather difficult to do without breaking the case tabs..?
I didn't realize the tabs on the side of the gyromite connector would need sawed off as well as the famicom shell would prevent seating of the cart as you've also pointed out..
I imagine people who use it have to hack those tabs off, but then consequently can't easily attach it to an original case that's sawed in half. So they just use the bare adapter without case? Or they take the famicom board out of the case which is rather difficult to do without breaking the case tabs..?
If you're gonna play the Game Boy, you gotta learn to play it right. -Kenny Rogers
- rainwarrior
- Posts: 8732
- Joined: Sun Jan 22, 2012 12:03 pm
- Location: Canada
- Contact:
Re: Ways to play Famicom games on an NES
Instead of sawing off the tabs you can just take the black double-sided pass-through and turn it upside down. Works exactly the same the other way around and a cartridge will fit on it fine.
- infiniteneslives
- Posts: 2104
- Joined: Mon Apr 04, 2011 11:49 am
- Location: WhereverIparkIt, USA
- Contact:
Re: Ways to play Famicom games on an NES
Oh right, but then it won't easily mount in an original case sawed in half.
I think the answer to your question DRW is people do what rainwarrior mentioned and then don't use a case at all.
I think the answer to your question DRW is people do what rainwarrior mentioned and then don't use a case at all.
If you're gonna play the Game Boy, you gotta learn to play it right. -Kenny Rogers
Re: Ways to play Famicom games on an NES
Has anyone tried one of these yet?
http://www.muramasaentertainment.com/in ... erter.html
http://www.muramasaentertainment.com/me ... rter_2.png
http://www.muramasaentertainment.com/me ... rter_3.png
here is another model:
http://www.muramasaentertainment.com/in ... erter.html
Also, was said already, but I can confirm that the audio output of the Famicom Everdrive is nearly inaudible and basically useless on the Famicom I have, so hopefully nobody is using that as gauge of anything.
http://www.muramasaentertainment.com/in ... erter.html
http://www.muramasaentertainment.com/me ... rter_2.png
http://www.muramasaentertainment.com/me ... rter_3.png
here is another model:
http://www.muramasaentertainment.com/in ... erter.html
I hope that allowing volume adjustment for expansion audio doesn't become the standard. As a composer, that's potentially bad because it means that when using the NES and exp audio together, it's going to sound different on different systems. The various Famicom revisions output at varying levels, so I'm guessing that's why people want to adjust it. I don't know if the NES will be 100% consistent or not. But I think it's worth noting that taking on this feature means the NES would inherit one of the problems of Famicom expansion audio..infiniteneslives wrote: Yes but the ENIO also provides support for external audio. No I'm not going to be making my own ENIO, I have no interest in doing so. You don't need to adjust the volume, but some people enjoy the feature. It has been reported that some people have buzzing issues with their console when the audio resistor is in place. So having the ability to switch it on/off or adjust the volume to near off may necessitate the feature.
Also, was said already, but I can confirm that the audio output of the Famicom Everdrive is nearly inaudible and basically useless on the Famicom I have, so hopefully nobody is using that as gauge of anything.
Re: Ways to play Famicom games on an NES
To be honest, I couldn't care less that the cartridge needs to face down. That's the smallest problem.infiniteneslives wrote:Most converters require the famicom front label to be facing down in the NES cartridge tray as you've mentioned. To keep the famicom label up you need a converter which 'flips' all the connections like I did with my design.
After further inspection, I came to the conclusion that one should maybe saw the cartridge shell at the position where the converter and the lower board meet and then use the converter upside down. This way, the plastic piece is not attached to the shell with screws, but it might still work.infiniteneslives wrote:I didn't realize the tabs on the side of the gyromite connector would need sawed off as well as the famicom shell would prevent seating of the cart as you've also pointed out..
How is anybody supposed to put this into his NES? The NES won't start if the cartridge simply hangs out.Memblers wrote:Has anyone tried one of these yet?
http://www.muramasaentertainment.com/in ... erter.html
http://www.muramasaentertainment.com/me ... rter_2.png
http://www.muramasaentertainment.com/me ... rter_3.png
This one looks totally useless for an unmodified front loader.
The black plastic piece is built as high as the board, i.e. the sides of the plastic piece don't have free space. Which means you cannot put a Famicom cartridge on top, you have to remove it from its shelf and use the Famicom board directly.Memblers wrote:here is another model:
http://www.muramasaentertainment.com/in ... erter.html
An issue that could have easily been fixed had they removed the upper edges of the board.
What were they thinking with this kind of design?
My game "City Trouble":
Gameplay video: https://youtu.be/Eee0yurkIW4
Download (ROM, manual, artworks): http://www.denny-r-walter.de/city.html
Gameplay video: https://youtu.be/Eee0yurkIW4
Download (ROM, manual, artworks): http://www.denny-r-walter.de/city.html
Re: Ways to play Famicom games on an NES
It will if the board is thicker, as it is for a Game Genie.DRW wrote:How is anybody supposed to put this into his NES? The NES won't start if the cartridge simply hangs out.
This one looks totally useless for an unmodified front loader.
Re: Ways to play Famicom games on an NES
And this will not wear out anything?
My game "City Trouble":
Gameplay video: https://youtu.be/Eee0yurkIW4
Download (ROM, manual, artworks): http://www.denny-r-walter.de/city.html
Gameplay video: https://youtu.be/Eee0yurkIW4
Download (ROM, manual, artworks): http://www.denny-r-walter.de/city.html
Re: Ways to play Famicom games on an NES
As I said earlier, the seller said that the adapter pretty much requires a blinking light win and it also has problems if RF is used.
Yeah the Everdrive is pretty much useless for anything that uses expansion audio. The games that are "supported" are effectively unplayable on the Everdrive unless you play without sound.
The differences isn't that big between Famicoms. I think it's mainly the AV Famicom that has low volume, and since it were released after the majority of the expansion audio games was made, games where probably made with the older Famicoms in mind. If I understand it correctly the potentiometer is not for simulating different Famicom systems, but for simulating different audio expansion cartridges since they may differ, and since the mixing has to be done in the console instead of in the cartridge in the NES' case.Memblers wrote:I hope that allowing volume adjustment for expansion audio doesn't become the standard. As a composer, that's potentially bad because it means that when using the NES and exp audio together, it's going to sound different on different systems. The various Famicom revisions output at varying levels, so I'm guessing that's why people want to adjust it. I don't know if the NES will be 100% consistent or not. But I think it's worth noting that taking on this feature means the NES would inherit one of the problems of Famicom expansion audio..infiniteneslives wrote: Yes but the ENIO also provides support for external audio. No I'm not going to be making my own ENIO, I have no interest in doing so. You don't need to adjust the volume, but some people enjoy the feature. It has been reported that some people have buzzing issues with their console when the audio resistor is in place. So having the ability to switch it on/off or adjust the volume to near off may necessitate the feature.
Also, was said already, but I can confirm that the audio output of the Famicom Everdrive is nearly inaudible and basically useless on the Famicom I have, so hopefully nobody is using that as gauge of anything.
Yeah the Everdrive is pretty much useless for anything that uses expansion audio. The games that are "supported" are effectively unplayable on the Everdrive unless you play without sound.
- infiniteneslives
- Posts: 2104
- Joined: Mon Apr 04, 2011 11:49 am
- Location: WhereverIparkIt, USA
- Contact:
Re: Ways to play Famicom games on an NES
All my audio expansion dongles will have a fixed 47k ohm resistor as that's about as 'standard' as we'll ever get, the adjustable pot is the optional feature enabled with a toggle switch.Memblers wrote:I hope that allowing volume adjustment for expansion audio doesn't become the standard.
If you're gonna play the Game Boy, you gotta learn to play it right. -Kenny Rogers
- rainwarrior
- Posts: 8732
- Joined: Sun Jan 22, 2012 12:03 pm
- Location: Canada
- Contact:
Re: Ways to play Famicom games on an NES
The 47k resistor is specifically for the PowerPak's simulated expansion sound, and subsequently the Everdrive was made to the same standard.Pokun wrote:AIf I understand it correctly the potentiometer is not for simulating different Famicom systems, but for simulating different audio expansion cartridges since they may differ, and since the mixing has to be done in the console instead of in the cartridge in the NES' case.
Yeah the Everdrive is pretty much useless for anything that uses expansion audio. The games that are "supported" are effectively unplayable on the Everdrive unless you play without sound.
The emulation of expansion sound on either of those flashcarts should be designed with the 47k resistor mix in mind, so it theoretically doesn't need to be adjusted for different expansions... but in practice the volume levels of these emulations doesn't really match the originals all that well anyway, and I think a pot helps compensate for this.
If you're planning to put Famicom carts in your NES, the 47k resistor is just not the right mix for it no matter what you do. They're all mixing on their own terms, and you're not going to get a good balance from anything unless you can make it adjustable instead.