Page 1 of 1

help with PCB design cartridge slot extender

Posted: Sat Feb 01, 2020 11:09 pm
by milkdudrecords
Hello im having hard time figuring the pin holes for these cartridge slot edge connectors for these consoles nes,snes,n64,sega genesis.Trying to make a board to mount the connectors and then a ribbon cable or header connectors to connect.I have done the solder the wires to cartridge slot edge connector to main console board alot of wires to solder i want to put it on a PCB board i just cant figure out pin holes and size of the connectors.Here what im trying to do in some pictures where i solder the wires to the connector and to main board of the console.
Image
Image
Image
Image
Image
Image

Re: help with PCB design cartridge slot extender

Posted: Thu Feb 06, 2020 10:54 am
by pwnskar
That looks like a lot of work! What's it for? Are you planning on making some sort of frankenstein all-consoles-in-the-same-box project? :)

Re: help with PCB design cartridge slot extender

Posted: Thu Feb 06, 2020 1:56 pm
by milkdudrecords
yes i am

Re: help with PCB design cartridge slot extender

Posted: Mon Apr 27, 2020 7:25 pm
by Drozerix
milkdudrecords wrote:
Thu Feb 06, 2020 1:56 pm
yes i am
Have you made any progress on this project of yours?

Re: help with PCB design cartridge slot extender

Posted: Sat Jul 25, 2020 3:59 pm
by milkdudrecords
heres a update of pcb board Image
Screenshot_2020-07-25 PCB Prototype - JLCPCB(1).png


layers : 5
minimum trace width : >=10 mil
minimum trace spacing : >=10 mil
minimum drill size : 0.2 mm
width : 235.33 mm
height : 112.52 mm