It is currently Fri Jun 23, 2017 12:06 pm

All times are UTC - 7 hours





Post new topic Reply to topic  [ 1 post ] 
Author Message
PostPosted: Wed Nov 02, 2016 11:12 pm 
Offline

Joined: Wed Nov 02, 2016 5:54 pm
Posts: 1
1. Would/should this setup work without issues?
2. Any particular notes on configuring it?

Word on #nesdev is Pasky has said the RGB and s-video/composite outputs are driven independently of one another; thus should be fine. But a minor concerned was raised that some actual ICs don't like running that many output buffers.

There's only one TLL (CS#) pin to use, just wire it to a hd15 VGA port like etim's diagrams show
S-video port through the luma (Y), see diagrams
No extra components/boards needed?

WHY?
Now you can use a VGA to BNC cable to a PVM display
and an S-video cable to a common S-video/composite capture card, such as http://www.hauppauge.com/site/support/s ... r1150.html
(which many people already have, and RGB analog cards such as http://www.newegg.com/Product/Product.a ... 24G3WM1581 cost a lot)
No need to use distributors, downscalers, or even worry about PVM's RGB loop-through grounding, only requires 1 VGA to BNC cable and 1 S-video cable. You get the best quality for your gaming with least interference and entropy, and still capture/stream it at a quality well above a normal NES.

PS. 3.5mm audio to Y-split, 1. external speakers 2. Line-in capture card

Does this all check out? Any thoughts, concerns or notes to add?

Thanks so much!!


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 1 post ] 

All times are UTC - 7 hours


Who is online

Users browsing this forum: No registered users and 6 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group