Help with NES RGB mod.

Discuss hardware-related topics, such as development cartridges, CopyNES, PowerPak, EPROMs, or whatever.

Moderator: Moderators

Post Reply
Dinosauravenger1989
Posts: 1
Joined: Fri Mar 31, 2017 6:35 am

Help with NES RGB mod.

Post by Dinosauravenger1989 »

I apologise if this is the wrong section to post this or has been discussed before, but I've just completed the nesrgb mod by viletim.

When I completed the mod I plugged my Nes into the TV via XRGB-mini, but my mini said there was no input. I made sure RGB was selected. So I tried plugging my Nes directly into the TV via composite, same deal, no input.

Prior to completing the mod but after removing the PPU I checked that it all still worked via composite, and it did, with no issues. Could anybody shed some light on what could be causing this issue? I would be extremely grateful.
Post Reply