NESRGB audio input/outputs mixed with Twin Famicom audio

Discuss hardware-related topics, such as development cartridges, CopyNES, PowerPak, EPROMs, or whatever.

Moderator: Moderators

Post Reply
User avatar
evilsim
Posts: 14
Joined: Sat Nov 07, 2015 11:13 pm

NESRGB audio input/outputs mixed with Twin Famicom audio

Post by evilsim »

Tims NESRGB board does a really nice job. It also does a nice job improving the audio out by means of the O, A and B pads on the NESRGB PCB.
I have just dug out my TwinFC and RGB modded with a NESRGB board - but I thought, I would like to use the improved audio mixing circuit on the NESRGB, but also be able to utilize expanded FDS audio and other cartridge audio.

There is a through hole pad on the NESRGB, right next to J5 which you can use to inject FDS or cart audio.

Has anyone done this before ? Used the NESRGB's audio circuit and mixed this with the audio system on the Twin Famicom ? I think it would sound better than stock :)

Im not entirely sure where I could pinch JUST the FDS/Cart audio from, to then solder a wire between that point and the aforementioned injection pad on the NESRGB.

Thanks for any advice / ideas.
Post Reply