It is currently Tue Jul 23, 2019 5:20 pm

All times are UTC - 7 hours





Post new topic Reply to topic  [ 7 posts ] 
Author Message
PostPosted: Thu Jul 11, 2019 9:16 am 
Offline

Joined: Wed Nov 09, 2016 1:19 pm
Posts: 3
Hello everyone.

I was made custom game cartrige, with micro mages game, based on original "F1 Race" famicom cartrige

Image

Image

Image

when i run this cart on dandy famiclone, game working fine

Image

Image

but when i run on original hardware, i got this

Image

Image

game and music work fine, all sprites shown as "nine" digit,
are anyone known whats can be wrong ?


Top
 Profile  
 
PostPosted: Thu Jul 11, 2019 9:32 am 
Offline

Joined: Sun Apr 13, 2008 11:12 am
Posts: 8491
Location: Seattle
Check what CHR's /OE and /CE signals are connected to. I'd hunch you've accidentally left it enabled all the time, and that interferes with the real PPU's multiplexed address/data bus. (Many famiclones demultiplexed this bus)


Top
 Profile  
 
PostPosted: Thu Jul 11, 2019 9:50 am 
Offline

Joined: Wed Nov 09, 2016 1:19 pm
Posts: 3
lidnariq wrote:
Check what CHR's /OE and /CE signals are connected to. I'd hunch you've accidentally left it enabled all the time, and that interferes with the real PPU's multiplexed address/data bus. (Many famiclones demultiplexed this bus)


CE connected to the GND, OE connected to 17 pin (PPU /RD)


Top
 Profile  
 
PostPosted: Thu Jul 11, 2019 10:14 am 
Offline

Joined: Sun Apr 13, 2008 11:12 am
Posts: 8491
Location: Seattle
CHR /CE should be connected to PPU A13. /OE is correct.


Top
 Profile  
 
PostPosted: Thu Jul 11, 2019 11:57 am 
Offline

Joined: Wed Nov 09, 2016 1:19 pm
Posts: 3
lidnariq wrote:
CHR /CE should be connected to PPU A13. /OE is correct.


Yes, /CE connect to the PPU A13, looks better but something wrong
also i connect CHR EEPROM A13 to GND - game run perfect!

Thank you "lidnariq" !

Where i can read about PPU A13 behaiour ?

Image


Top
 Profile  
 
PostPosted: Thu Jul 11, 2019 12:26 pm 
Offline

Joined: Sun Apr 13, 2008 11:12 am
Posts: 8491
Location: Seattle
... mayyyybe nesdevwiki:Cartridge connector ?
Most boards tie [PPU A13] directly to the /CE of CHR ROM or CHR RAM to map it into pattern table space ($0000-$1FFF) without any extra logic.


Or maybe nesdevwiki:PPU memory map?


Top
 Profile  
 
PostPosted: Thu Jul 11, 2019 12:29 pm 
Offline

Joined: Thu May 19, 2005 11:30 am
Posts: 945
I did not know that even the Dendy Junior could already deglitch the PPU signals! I thought only later famiclones could do that, because I have only seen post-2000 cartridges that require such a thing.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 7 posts ] 

All times are UTC - 7 hours


Who is online

Users browsing this forum: Tomy and 5 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group