Page 1 of 1

Meikyuu Jiin Dababa (FDS Conversion) (Kaiser KS-7016B)

Posted: Wed Sep 18, 2019 1:47 pm
by krzysiobal

Code: Select all

PRG: 
  $6000 $8000 $a000 $c000 $e000
   REG0     8     9     a     b
 
CHR:
  8kB CHR-RAM
  
Bus conflicts:
  yes

Warning:
  Despite enabling ROM below $8000, M2 is not taken into account at all.

A~[1.........PPPP..] : REG0
             ||||
             ++++- set PRG bank at $6000
                   value written | effective PRG bank will be
                            0..7 | 0..7
                            8..b | c..f
                            c..f | c..f

Image Image Image Image

Re: Meikyuu Jiin Dababa (FDS Conversion) (Kaiser KS-7016B)

Posted: Wed Sep 18, 2019 2:21 pm
by Ben Boldt
Sorry to go off topic but I just recently discovered that crusty edge connectors like this can be cleaned by scrubbing hard with white toothpaste and a toothbrush, it works very well. Then brushing it with lots of water afterwards to remove the toothpaste and let completely dry before using. It sounds crazy but it is similar concept to removing scratches from CDs. I fixed a very deteriorated Super Mario Bros. this way, back to almost brand new. I have used a jeweler's fiberglass brush before but it can remove the top layer and expose the copper too easily.

Re: Meikyuu Jiin Dababa (FDS Conversion) (Kaiser KS-7016B)

Posted: Fri Oct 25, 2019 4:00 am
by Ice Man
Is this ROM dumped yet? It does not seem to be the mapper 108 one.

I can only find KS-7016 board, which is Exciting Basket, iNES 2.0 Mapper 306 but I can't find KS-7016B. What's the difference?

Re: Meikyuu Jiin Dababa (FDS Conversion) (Kaiser KS-7016B)

Posted: Fri Oct 25, 2019 9:02 am
by NewRisingSun
No other mapper is like this, so I intend to assign mapper #549 for KS-7016B.

Attach find an IPS BPS patch to convert the mapper 108 version to the KS-7016B version.

Edit: replaced the IPS-format with a BPS-format patch, because the IPS-format patch file was almost as large as the game itself due to the different bank order between the two conversions.

Re: Meikyuu Jiin Dababa (FDS Conversion) (Kaiser KS-7016B)

Posted: Fri Oct 25, 2019 10:13 am
by Ice Man
Ah i see. Thanks alot. :)