Trying to Dump Metal Storm from Retrobit

[mistermorcus]

I've been doing some research and trying to find out if it is possible to dump Metal Storm from Retrobit. I have seen it mentioned that it is using mapper 268 and is a variant of the Coolboy/Mindkids board. I found a pretty good writeup of it here:

http://nerdlypleasures.blogspot.com/202 ... m.html?m=1

There is a photo of the pcb there, but I can take some more shots of mine that are a little clearer. I also found some more info in this thread where copynes scripts were converted to anago scripts, but since it was for a different rom I was not sure if it would work:

viewtopic.php?f=9&t=15240&start=45

Unfortunately I don't know much about the scripts required for something like this. Some people have said that the kazzo can't maintain the proper m2 signal but in the other thread I referenced it seemed like if I start scanning at a certain location it would prevent the reset lockout. I appreciate any help that can be offered.

[Ice Man]

Mapper 268 is quite a clone of MMC3 with some extra:
https://wiki.nesdev.com/w/index.php/NES_2.0_Mapper_268

[acem77]

I am looking for similar help with jimpower nes, and the pcb looks similar.
My post with more details.
http://forums.nesdev.com/viewtopic.php?f=9&t=22249