CopyNES Capacitor replacement

Discuss hardware-related topics, such as development cartridges, CopyNES, PowerPak, EPROMs, or whatever.

Moderators: B00daW, Moderators

Post Reply
Posts: 1
Joined: Sun Jan 25, 2009 6:49 am

CopyNES Capacitor replacement

Post by Xyvius » Sun Jan 25, 2009 7:07 am

I recenlty recieved my CopyNES USB from RetroUSB and upon reading the directions found that there is an "included" capacitor mentioned that I did not receive. No big deal, they are cheap and easy to come by ( I probably have one laying around) but one small problem, It never mentions any specs of the one that is replacing the old one. I have no clue what to replace it with..

Can someone let me know what to buy and I will just pick it up at Radio Shack or something (assuming I dont have it).

Thansk in advance,

User avatar
Posts: 1048
Joined: Tue Jul 03, 2007 1:49 pm

Post by Jeroen » Sun Jan 25, 2009 3:11 pm mentions the value for the p-port copynes. Its most likely the same.

Posts: 81
Joined: Fri Aug 22, 2008 10:04 am

Post by sleepy9090 » Mon Jan 26, 2009 2:50 pm

50V 1uF

im sure you know not to wire it backwards if you use can type
mainboard should be marked for polarity

Post Reply