USB CopyNES for Linux

Discuss hardware-related topics, such as development cartridges, CopyNES, PowerPak, EPROMs, or whatever.

Moderators: B00daW, Moderators

User avatar
teaguecl
Posts: 210
Joined: Thu Oct 21, 2004 4:02 pm
Location: San Diego

Post by teaguecl » Tue Nov 03, 2009 2:39 pm

I also wanted to thank Crade and Wookie for this. I purchased a USB Copynes used, and it came in a somewhat unusable form. I need to do some soldering to get it going, which I haven't gotten around to - but when I do I'm going to attempt to get it talking to my Linux box. My goal is to update the firmware on my PowerPak from Linux, has anyone done this? If not, I'll send the details of how it goes.

User avatar
crade
Posts: 69
Joined: Thu Aug 03, 2006 2:31 pm

Post by crade » Thu Nov 05, 2009 1:27 pm

Let me know if you guys have any trouble with it when you use it.

teaguecl:
copynesl doesn't have write support complete yet. I just added the ability to write wram a few days ago, ram cart support should be coming soon.

User avatar
famitek
Posts: 9
Joined: Sun Nov 23, 2008 3:27 am

Post by famitek » Fri Nov 06, 2009 9:51 pm

YES! I got it to work. I dumped City Connection and Super Mario Bros. 3. Do you have to specify the both the plugin and mapper each time you dump a cartridge?

User avatar
Wookie
Posts: 76
Joined: Sat Mar 01, 2008 5:06 pm
Location: Seattle, WA
Contact:

Post by Wookie » Sat Nov 07, 2009 1:56 am

crade wrote:Let me know if you guys have any trouble with it when you use it.

teaguecl:
copynesl doesn't have write support complete yet. I just added the ability to write wram a few days ago, ram cart support should be coming soon.
Crade,

I noticed you haven't pushed your latest patch up to the bitbucket. It's pretty simple, just do the following:

hg push http://www.bitbucket.org/wookie/libcopynes

I made you a writer on that repo, you just have to give it your usual u/p for bitbucket.

I still have your patchfile, so if you're too busy to push your changes, I can do it for you.

--Wookie

User avatar
crade
Posts: 69
Joined: Thu Aug 03, 2006 2:31 pm

Post by crade » Sat Nov 07, 2009 2:52 pm

Wookie wrote:
crade wrote:Let me know if you guys have any trouble with it when you use it.

teaguecl:
copynesl doesn't have write support complete yet. I just added the ability to write wram a few days ago, ram cart support should be coming soon.
Crade,

I noticed you haven't pushed your latest patch up to the bitbucket. It's pretty simple, just do the following:

hg push http://www.bitbucket.org/wookie/libcopynes

I made you a writer on that repo, you just have to give it your usual u/p for bitbucket.

I still have your patchfile, so if you're too busy to push your changes, I can do it for you.

--Wookie
I'm at work at the moment, but I'll update it when I get home.

User avatar
famitek
Posts: 9
Joined: Sun Nov 23, 2008 3:27 am

Post by famitek » Mon Mar 01, 2010 9:16 pm

Is it possible to dump Dragon Warrior III or Dragon Warrior IV using copynesl?

crix0r
Posts: 4
Joined: Wed Jun 03, 2020 12:01 pm
Location: Virginia

Re:

Post by crix0r » Thu Jul 30, 2020 4:31 am

crade wrote:
Sat Nov 07, 2009 2:52 pm
Wookie wrote:
crade wrote:Let me know if you guys have any trouble with it when you use it.

teaguecl:
copynesl doesn't have write support complete yet. I just added the ability to write wram a few days ago, ram cart support should be coming soon.
Crade,

I noticed you haven't pushed your latest patch up to the bitbucket. It's pretty simple, just do the following:

hg push http://www.bitbucket.org/wookie/libcopynes

I made you a writer on that repo, you just have to give it your usual u/p for bitbucket.

I still have your patchfile, so if you're too busy to push your changes, I can do it for you.

--Wookie
I'm at work at the moment, but I'll update it when I get home.
Hello Everyone -

Does anyone know what happened to libcopynes? The bitbucket link is dead.

Thanks!

crix0r

Post Reply