It is currently Thu Apr 26, 2018 4:21 pm

View unanswered posts | View active topics


Board index » NES / Famicom » NES Hardware and Flash Equipment

All times are UTC - 7 hours





Post new topic Reply to topic  Page 2 of 4
  [ 53 posts ]  Go to page Previous  1, 2, 3, 4  Next
  Print view Previous topic | Next topic 
Author Message
3gengames
PostPosted: Tue Oct 23, 2012 7:54 pm 
Offline
Formerly 65024U

Joined: Sat Mar 27, 2010 12:57 pm
Posts: 2259
I'm pretty sure the ntsc game has all the sound the expansion has. or close to it, as even I can't hear much difference. They did a great conversion. Shame it never saw the light of day.
Top
 Profile  
 
MottZilla
PostPosted: Tue Oct 23, 2012 9:44 pm 
Offline
User avatar

Joined: Wed Dec 06, 2006 8:18 pm
Posts: 2824
The US version has no *missing* sounds though. It doesn't have the extra channels but since it doesn't use them it still works. I wouldn't say that the extra sound channels in the japanese version are what make the game worth playing.
Top
 Profile  
 
Dwedit
PostPosted: Tue Oct 23, 2012 10:10 pm 
Offline
User avatar

Joined: Fri Nov 19, 2004 7:35 pm
Posts: 4030
Gimmick is a lot easier if you've played though the game and practiced with savestates. Then you're ready to take it on.
But the PAL version is much easier, since it's 5/6 the speed.

_________________
Here come the fortune cookies! Here come the fortune cookies! They're wearing paper hats!
Top
 Profile  
 
picccca
PostPosted: Tue Oct 23, 2012 10:30 pm 
Offline
User avatar

Joined: Wed Nov 24, 2010 12:51 am
Posts: 44
Location: Finland
l_oliveira wrote:
Gimmick! is a awesome game. And it's soo hard it's even funny in a very sadistic way .


You're right it's a great game, I have completed the european version of it, Mr Gimmick!, several times. It's not that hard. Where did the us version come from? Is there some differences from european version to the us version?

EDIT: ok already got the answer :)
Top
 Profile  
 
jpx72
PostPosted: Tue Oct 23, 2012 10:37 pm 
Offline
User avatar

Joined: Tue Sep 28, 2010 3:27 am
Posts: 178
Location: Slovakia
Can anyone who actually owns Gimmick (J) trace the connections of the mapper to see where the extra components are connected to? On nesdev wiki about Sunsoft5b pinout is a information about relation of pins 3 or 18 with audio output, but on the PCB photo it looks like nothing is connected to these pins...


Last edited by jpx72 on Thu Nov 08, 2012 6:14 am, edited 1 time in total.

Top
 Profile  
 
byemu
PostPosted: Tue Oct 23, 2012 10:57 pm 
Offline
User avatar

Joined: Mon Sep 05, 2011 5:56 pm
Posts: 287
jpx72 wrote:
I have knowledge that some Dodge Danpei and Gremlins 2 cartridges (both Famicom) can have the Sunsoft 5B mapper inside .
But according to NEScartDB (Gimmick- Gremlins2)the original Gimmick (J) has it wired differently and added 4 caps and 3 resistors. Can anyone who actually owns Gimmick (J) trace the connections of the mapper to see where the extra components are connected to? On nesdev wiki about Sunsoft5b pinout is a information about relation of pins 3 or 18 with audio output, but on the PCB photo it looks like nothing is connected to these pins...


Gimmick (J) use the cartridge pin 45 and 46!
Top
 Profile  
 
l_oliveira
PostPosted: Wed Oct 24, 2012 5:15 am 
Offline
User avatar

Joined: Wed Jul 13, 2011 6:51 am
Posts: 395
Location: Brasilia, Brazil
MottZilla wrote:
The US version has no *missing* sounds though. It doesn't have the extra channels but since it doesn't use them it still works. I wouldn't say that the extra sound channels in the japanese version are what make the game worth playing.


No, it is what made me pick the Japanese version instead of the others.
Top
 Profile  
 
lidnariq
PostPosted: Wed Oct 24, 2012 9:34 am 
Online

Joined: Sun Apr 13, 2008 11:12 am
Posts: 7037
Location: Seattle
jpx72 wrote:
On nesdev wiki about Sunsoft5b pinout is a information about relation of pins 3 or 18 with audio output, but on the PCB photo it looks like nothing is connected to these pins...
I started tracing that (from photos) a while ago; the traces from the capacitors go under the SS5B IC and I can't figure them out beyond there. At that point I verified 50% of the rest and then just copied and pasted kevtris's FME7 schematic.

byemu wrote:
Gimmick (J) use the cartridge pin 45 and 46!
Yes, it's a famicom game with expansion audio? The question was about the IC.

But here's my best effort, from looking at both sides of the board. Pins 3 and 18 I can't precisely follow.


Attachments:
ss5ba.png
ss5ba.png [ 1.4 KiB | Viewed 3858 times ]
Top
 Profile  
 
jpx72
PostPosted: Thu Oct 25, 2012 4:52 am 
Offline
User avatar

Joined: Tue Sep 28, 2010 3:27 am
Posts: 178
Location: Slovakia
Great work lidnariq, thanks for the effort! Could someone with the actual cart confirm that?
Top
 Profile  
 
B00daW
PostPosted: Fri Oct 26, 2012 12:59 pm 
Offline
User avatar

Joined: Thu Jan 03, 2008 1:48 pm
Posts: 553
So what differs between Sunsoft-5A and FME-7?
Top
 Profile  
 
byemu
PostPosted: Sat Oct 27, 2012 6:49 am 
Offline
User avatar

Joined: Mon Sep 05, 2011 5:56 pm
Posts: 287
B00daW wrote:
So what differs between Sunsoft-5A and FME-7?


Need more test!
Top
 Profile  
 
B00daW
PostPosted: Thu Nov 01, 2012 7:37 pm 
Offline
User avatar

Joined: Thu Jan 03, 2008 1:48 pm
Posts: 553
I bet testing an NSF with a Sunsoft-5A cart dongled to a TNS-HFC3 cart would be enlightening. ENIO could also pay a roll in helping out with a lot more debugging and discoveries.
Top
 Profile  
 
80sFREAK
PostPosted: Fri Nov 02, 2012 1:42 am 
Offline

Joined: Sat Sep 03, 2011 11:40 pm
Posts: 275
jpx72 wrote:
I have knowledge that some Dodge Danpei and Gremlins 2 cartridges (both Famicom) can have the Sunsoft 5B mapper inside .
But according to NEScartDB (Gimmick- Gremlins2)the original Gimmick (J) has it wired differently and added 4 caps and 3 resistors. Can anyone who actually owns Gimmick (J) trace the connections of the mapper to see where the extra components are connected to? On nesdev wiki about Sunsoft5b pinout is a information about relation of pins 3 or 18 with audio output, but on the PCB photo it looks like nothing is connected to these pins...

There is some traces under the chip. Anyone want to crack their Gimmick and desolder mapper chip? C'mon, it's for science :wink:
Top
 Profile  
 
infiniteneslives
PostPosted: Fri Nov 02, 2012 6:02 am 
Offline
User avatar

Joined: Mon Apr 04, 2011 11:49 am
Posts: 2071
Location: WhereverIparkIt, USA
80sFREAK wrote:
There is some traces under the chip. Anyone want to crack their Gimmick and desolder mapper chip? C'mon, it's for science :wink:


We do have multimeters now a days with such things like continuity check that allow you to answer these questions by non-destructive means...

_________________
If you're gonna play the Game Boy, you gotta learn to play it right. -Kenny Rogers
Top
 Profile  
 
80sFREAK
PostPosted: Fri Nov 02, 2012 1:52 pm 
Offline

Joined: Sat Sep 03, 2011 11:40 pm
Posts: 275
The keyword is "crack" and "desolder" is just to make it more dramatic :wink:

Still no volunteers :?
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 2 of 4
  [ 53 posts ]  Go to page Previous  1, 2, 3, 4  Next

Board index » NES / Famicom » NES Hardware and Flash Equipment

All times are UTC - 7 hours


Who is online

Users browsing this forum: No registered users and 6 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group