NES inside Gameboy DMG Shell (ideas? Not Raspberry PI)

Discuss hardware-related topics, such as development cartridges, CopyNES, PowerPak, EPROMs, or whatever.

Moderators: B00daW, Moderators

megalon
Posts: 4
Joined: Mon Nov 25, 2013 4:27 am

NES inside Gameboy DMG Shell (ideas? Not Raspberry PI)

Post by megalon » Mon Nov 25, 2013 4:38 am

Hi there,

It's a really old idea - make an NES inside Gameboy DMG and there are some implementations. But it's usually either a bulky monster with a cartridge slot attached to the back or a raspberry PI. The former is not very portable anymore and the latter... well, I think it's like killing the fly from bazooka... why on earth would anybody want to waste a fully functional PC for an emulator with 8 buttons!? Not to mention that when you turn it on - there's linux loading and stuff... I can't accept it as portable NES, sorry but it's just lame :(

Basically what I want is NES inside DMG that has built in flash or programmable cartridge (of gameboy form of course) with ROMS. The question is - what should be the guts of the system?
Variants - FPGA or hacked portable NES clone.

Sooo, does anybody have ideas, tuts or resources?

Thank!

User avatar
tokumaru
Posts: 11465
Joined: Sat Feb 12, 2005 9:43 pm
Location: Rio de Janeiro - Brazil

Re: NES inside Gameboy DMG Shell (ideas? Not Raspberry PI)

Post by tokumaru » Mon Nov 25, 2013 6:39 am

I wonder if it would be possible to fit the guts of a portable clone and an Everdrive N8...

User avatar
qbradq
Posts: 943
Joined: Wed Oct 15, 2008 11:50 am

Re: NES inside Gameboy DMG Shell (ideas? Not Raspberry PI)

Post by qbradq » Mon Nov 25, 2013 7:04 am

You could probably do it with an FPGA board, although it might need to be multi-layer to get the kind of densities you need. The big problem with FPGA's is that you need big logic density to implement an NES system, and even more if you want to interface with an SD card or similar, and as you increase logic density you typically increase pin count. You get to a point where there are no packaging options other than BGA, and they you're kinda screwed from a hobbyist point of view.

tepples
Posts: 21748
Joined: Sun Sep 19, 2004 11:12 pm
Location: NE Indiana, USA (NTSC)
Contact:

Re: NES inside Gameboy DMG Shell (ideas? Not Raspberry PI)

Post by tepples » Mon Nov 25, 2013 7:26 am

megalon wrote:why on earth would anybody want to waste a fully functional PC for an emulator with 8 buttons!?
Why would anyone want to turn a fully functional smartphone or tablet with a touch screen into on-screen buttons? Yet emulators remain popular on Android.
Not to mention that when you turn it on - there's linux loading and stuff
Ubuntu and some other GNU/Linux distributions use a "pretty" boot splash that hides all the "scary" kernel and init messages. So does Android, which uses the same kernel (Linux) as GNU/Linux. PS3 and PS4 run Game OS and Orbis operating systems derived from NetBSD and FreeBSD respectively, but they've been customized to the point where the user can't tell they're there.

User avatar
tokumaru
Posts: 11465
Joined: Sat Feb 12, 2005 9:43 pm
Location: Rio de Janeiro - Brazil

Re: NES inside Gameboy DMG Shell (ideas? Not Raspberry PI)

Post by tokumaru » Mon Nov 25, 2013 8:06 am

The problem with booting an OS is the time it takes from power on to the beginning of gameplay.

User avatar
qbradq
Posts: 943
Joined: Wed Oct 15, 2008 11:50 am

Re: NES inside Gameboy DMG Shell (ideas? Not Raspberry PI)

Post by qbradq » Mon Nov 25, 2013 8:14 am

Yea, that is kind of a bummer.

tepples
Posts: 21748
Joined: Sun Sep 19, 2004 11:12 pm
Location: NE Indiana, USA (NTSC)
Contact:

Re: NES inside Gameboy DMG Shell (ideas? Not Raspberry PI)

Post by tepples » Mon Nov 25, 2013 12:22 pm

tokumaru wrote:The problem with booting an OS is the time it takes from power on to the beginning of gameplay.
Authentic Game Boy and Nintendo DS systems have the same problem, satirized in my Pretendo demo. So does every disc console.

User avatar
qbradq
Posts: 943
Joined: Wed Oct 15, 2008 11:50 am

Re: NES inside Gameboy DMG Shell (ideas? Not Raspberry PI)

Post by qbradq » Mon Nov 25, 2013 2:23 pm

Come to think of it, don't all Gameboy titles have an annoying "Gameboy" logo screen that takes tedious seconds to GTFA?

megalon
Posts: 4
Joined: Mon Nov 25, 2013 4:27 am

Re: NES inside Gameboy DMG Shell (ideas? Not Raspberry PI)

Post by megalon » Mon Nov 25, 2013 3:48 pm

It's true that GB has splash screen. But NES does not :) And most importantly GB splash takes mere seconds, while Raspberry PI takes some time... and it takes some time to launch an emulator. PI's problem is that it's a PC. DMG has 8 buttons. PI is capable of Keyboard, mouse, networking, HD output etc. Do you see what I mean? 99% of PI's capabilities are wasted, not to mention that powering a fully functional PC compared a little board capable of NES only is way more expensive and I'd like to have decent battery life.

As for implementation. Further research brought me to the conclusion that FPGA is indeed a nice way to do it. There are couple implementations, although I'm not sure if there a PCB small enough to fit DMG shell.

Screen, buttons - not a problem at all. Screen - car rear view TFT (cheap and does the job). Buttons - plenty (radio stores).

Rechargeable battery - doable. Will probably require some messing around but should be fine.

Cartridge reading / choosing games - I saw an article where a bloke made it with NIOS II I need to investigate in that direction. Btw he made an NES clone on FPGA. I've send him a message, let's see what he'll say about the matter. Here's the article BUT it's in Russian http://habrahabr.ru/post/185872/.

User avatar
qbradq
Posts: 943
Joined: Wed Oct 15, 2008 11:50 am

Re: NES inside Gameboy DMG Shell (ideas? Not Raspberry PI)

Post by qbradq » Mon Nov 25, 2013 5:08 pm

I'd ditch the attitude that overkill is inherently a bad thing. The FPGA you end up with will likely be capable of a hell of a lot more than an NES implementation, but that doesn't mean it's the wrong tool for the job.

Also, it may surprise you to find that most FPGA's with the logic density you're going to need for this are going to be more expensive just for the chip than a Raspberry PI is assembled and delivered to your doorstep. You're still going to have to get a multi-layer PCB manufactured and a high-density BGA device soldered on there somehow (although a modified toaster oven could get the job done).

I'm not trying to tell you not to try. If anyone on this board did things the practical way we wouldn't be developing for this platform :) Just trying to give you a heads-up on what to expect.

megalon
Posts: 4
Joined: Mon Nov 25, 2013 4:27 am

Re: NES inside Gameboy DMG Shell (ideas? Not Raspberry PI)

Post by megalon » Mon Nov 25, 2013 5:50 pm

qbradq yeah, I'm trying to look at all the pros and cons of each variant. PI is cheaper indeed, and FPGA is a bit of an overkill for the job either...

What's definitely the "cleanest" way to do that is to hack a clone. But in this case I'm gonna need to remove the cartridge slot and connect it directly to some sort of a controller responsible for switching roms. And all that should go to the very same screen. Which means I need a default ROM which lists all the available games and, when selected, loads the corresponding ROM and resets the system... pice of cake... :(

lidnariq
Posts: 8776
Joined: Sun Apr 13, 2008 11:12 am
Location: Seattle

Re: NES inside Gameboy DMG Shell (ideas? Not Raspberry PI)

Post by lidnariq » Mon Nov 25, 2013 5:54 pm

If you are ok with limiting the specific games you play, you could bundle a huge pile of plain NROM games with a single banking register, something like mapper 62.

tepples
Posts: 21748
Joined: Sun Sep 19, 2004 11:12 pm
Location: NE Indiana, USA (NTSC)
Contact:

Re: NES inside Gameboy DMG Shell (ideas? Not Raspberry PI)

Post by tepples » Mon Nov 25, 2013 6:01 pm

Or you could use mapper 34 (BxROM), which supports any number of NROM games with the same mirroring as long as your multicart menu copies the PRG ROM data to CHR RAM when the player selects a game.

User avatar
qbradq
Posts: 943
Joined: Wed Oct 15, 2008 11:50 am

Re: NES inside Gameboy DMG Shell (ideas? Not Raspberry PI)

Post by qbradq » Tue Nov 26, 2013 6:49 am

Unfortunately the EverDrive n8 is too big to fit in the case, and if you roll your own you're back to square one. An FPGA is about the only way to implement one of those things ;) That or a really big CPLD.

User avatar
NESHomebrew
Formerly WhatULive4
Posts: 393
Joined: Fri Oct 30, 2009 4:43 am
Contact:

Re: NES inside Gameboy DMG Shell (ideas? Not Raspberry PI)

Post by NESHomebrew » Tue Nov 26, 2013 12:25 pm

I haven't seen any with built in games, but I have seen a few with cartridge slots. Here is one example http://www.dashfest.com/?p=344

There are some inexpensive devices with built in NES emulators I've seen portablized. I'll see if I can find one. edit Here is an example of one http://techcrunch.com/2009/09/04/review ... -emulator/

Post Reply