絵描衛門 / Dezaemon PCB scan

Japanese-language board. ファミコン向けの日本語のフォーラム

Moderator: Moderators

Post Reply
User avatar
naruko
Posts: 66
Joined: Mon Feb 09, 2009 9:10 am
Location: リムルダール Rimuldar
Contact:

絵描衛門 / Dezaemon PCB scan

Post by naruko »

PCB class: Nintendo HVC-SXROM-01
U1 PRG-ROM: ATH-87-0 PRG, 0x20000 byte ROM, CRC32: 0xd1e50064
U2 CHR-RAM: LH5168FB-10L, 0x2000 byte RAM
U4 W-RAM: LH52A256-10LL, 0x8000 byte RAM (banked)

high resolution and other sides scan
http://www1.axfc.net/u/3179252.zip

nescartdb にはどうやって登録するの?
Attachments
ath-87_pcb_top_low.jpg
User avatar
Bregalad
Posts: 8055
Joined: Fri Nov 12, 2004 2:49 pm
Location: Divonne-les-bains, France

Re: 絵描衛門 / Dezaemon PCB scan

Post by Bregalad »

A third SXROM game ? Cool, I always tought there were only 2.

Does it use all 32k of SRAM ?
As far I know both Final Fantasy I & II and Best Play Pro Yakyuu Special used only 16k (both are multicard with 2 games on them I think, please tell me if I'm wrong).
User avatar
naruko
Posts: 66
Joined: Mon Feb 09, 2009 9:10 am
Location: リムルダール Rimuldar
Contact:

Re: 絵描衛門 / Dezaemon PCB scan

Post by naruko »

デザエモンはゲームを作るソフトだ。自分はこのソフトを使ったことがないが、ユーザーに聞いたことがある。
このソフトでは4つのステージを作ることができる。4つのステージのデータは RAM の page 0,1,2,3 が Stage 1,2,3,4 になるというので、おそらくSRAM全てを使用している可能性が高い。

このユーザーは絵描衛門がエミュレータで正常に動かないと言っている。
http://dezagarou.ame-zaiku.com/html/other/ezaemon.html
ちなみに、絵描衛門はエミュレーターでは正常に作動しません。

エディットモードで保存する事が出来ず、フリーズしてしまいます。
User avatar
Bregalad
Posts: 8055
Joined: Fri Nov 12, 2004 2:49 pm
Location: Divonne-les-bains, France

Re: 絵描衛門 / Dezaemon PCB scan

Post by Bregalad »

So basically as far as I can understand you, this game uses all 4 SRAM banks to allow the user to edit 4 different stages ? Sounds rather unique for a NES/FC game !

It seems current emus would emulate SNROM instead (with no SRAM banking) and crash on edit mode, as the emu refuses to switch RAM banks ?

I also see that the PRG-ROM is 28-pin so it means its size is 128kb or less, so they definitely used this board for SRAM banking solely.
Pokun
Posts: 2675
Joined: Tue May 28, 2013 5:49 am
Location: Hokkaido, Japan

Re: 絵描衛門 / Dezaemon PCB scan

Post by Pokun »

naruko wrote: nescartdb にはどうやって登録するの?
右上隅の[Register]をクリックして、そこでログイン、パスワード、メールの情報を入れてください。すみませんがそれ以上解りません。

Naruko is asking how to register and submit to bootgod. I have never done that so I don't really know.
User avatar
Bregalad
Posts: 8055
Joined: Fri Nov 12, 2004 2:49 pm
Location: Divonne-les-bains, France

Re: 絵描衛門 / Dezaemon PCB scan

Post by Bregalad »

As far as I can remember you have to talk to Bootgod directly, there is no automatic process for registering. Send him a PM.
etabeta
Posts: 109
Joined: Wed Nov 29, 2006 10:11 am
Location: Trieste, Italy

Re: 絵描衛門 / Dezaemon PCB scan

Post by etabeta »

@naruko: I've documented the 32k SRAM in MESS. thanks a lot!
I'm not fully sure how to verify that the saving/loading on different banks work (I hate dezaemon editor :) ), but FF1+2 works fine in MESS so I would expect this to work too...
Post Reply