Is famicom the same as in NES? (solved, not to be confused)

A place that you can discuss reproduction of classic titles or "licensed-for-reproduction" homebrew for personal use.

Moderators: B00daW, Moderators

Forum rules
1. NO BLATANT PIRACY. This includes reproducing homebrew less than 10 years old, with the exception of free software.
2. No advertising your reproductions, with the exception of free software.
3. Be nice. See RFC 1855 if you aren't sure what this means.
Post Reply
doragon
Posts: 3
Joined: Sun Sep 17, 2017 9:07 am

Is famicom the same as in NES? (solved, not to be confused)

Post by doragon »

Good morning to all.
I am happy to be with you and to learn and experience in this fantastic retro and electronic world.

I have just started (I have just been reading and documenting myself to start).
I have been trying to do the first project for some time, but without success. I suppose I can ask for help to the veterans. (I hope I can help in a few years too).

My project is: Final Mission (Famicom)
Image

After collecting everything you need:
1- PCB: HVC-SLROM-03 with MMC1B2 [Donor: TCF-PZ: Tecmo World Wrestling]
2- EPROM M27C1001-15f1 (128k) [ST company]
And deleted and programmed by separating PRG and CHR from rom.nes

I think the programming part is fine, but something is not right from the pinout welding part.
I've used all the ones I've found in the forum for PRG 128k and CHR 128k, but I think most are meant for NES versions and I guess it's different in Famicom.
Image
I do not ask you to solve the problem. Just to orient myself that things I can go probrando to continue learning and trying it. At first it costs a lot :)

Thank everyone and hope to be part of your community.
a greeting
PD- Forgive my terrible English.
Last edited by doragon on Thu Oct 05, 2017 1:02 pm, edited 1 time in total.
User avatar
Fisher
Posts: 1249
Joined: Sat Jul 04, 2015 9:58 am
Location: -29.794229 -55.795374

Re: Final Mission - Is famicom the same as in NES?

Post by Fisher »

Take a look on the ROM pinout using as base the MMC1.
I saw some Famicom cartridges that used standard ROM pinout.
Maybe that's the case?
doragon
Posts: 3
Joined: Sun Sep 17, 2017 9:07 am

Re: Final Mission - Is famicom the same as in NES?

Post by doragon »

Fisher wrote:Take a look on the ROM pinout using as base the MMC1.
I saw some Famicom cartridges that used standard ROM pinout.
Maybe that's the case?
I keep researching and testing from time to time. I'll take a look at what you're saying. Thank you very much for your help.
Post Reply