Good morning to all.
I am happy to be with you and to learn and experience in this fantastic retro and electronic world.
I have just started (I have just been reading and documenting myself to start).
I have been trying to do the first project for some time, but without success. I suppose I can ask for help to the veterans. (I hope I can help in a few years too).
My project is: Final Mission (Famicom)
After collecting everything you need:
1- PCB: HVC-SLROM-03 with MMC1B2 [Donor: TCF-PZ: Tecmo World Wrestling]
2- EPROM M27C1001-15f1 (128k) [ST company]
And deleted and programmed by separating PRG and CHR from rom.nes
I think the programming part is fine, but something is not right from the pinout welding part.
I've used all the ones I've found in the forum for PRG 128k and CHR 128k, but I think most are meant for NES versions and I guess it's different in Famicom.
I do not ask you to solve the problem. Just to orient myself that things I can go probrando to continue learning and trying it. At first it costs a lot
Thank everyone and hope to be part of your community.
a greeting
PD- Forgive my terrible English.
Is famicom the same as in NES? (solved, not to be confused)
Moderators: B00daW, Moderators
Forum rules
1. NO BLATANT PIRACY. This includes reproducing homebrew less than 10 years old, with the exception of free software.
2. No advertising your reproductions, with the exception of free software.
3. Be nice. See RFC 1855 if you aren't sure what this means.
1. NO BLATANT PIRACY. This includes reproducing homebrew less than 10 years old, with the exception of free software.
2. No advertising your reproductions, with the exception of free software.
3. Be nice. See RFC 1855 if you aren't sure what this means.
Is famicom the same as in NES? (solved, not to be confused)
Last edited by doragon on Thu Oct 05, 2017 1:02 pm, edited 1 time in total.
Re: Final Mission - Is famicom the same as in NES?
Take a look on the ROM pinout using as base the MMC1.
I saw some Famicom cartridges that used standard ROM pinout.
Maybe that's the case?
I saw some Famicom cartridges that used standard ROM pinout.
Maybe that's the case?
Re: Final Mission - Is famicom the same as in NES?
I keep researching and testing from time to time. I'll take a look at what you're saying. Thank you very much for your help.Fisher wrote:Take a look on the ROM pinout using as base the MMC1.
I saw some Famicom cartridges that used standard ROM pinout.
Maybe that's the case?