INLretro Dumper-Programmer exits to command line
Moderator: Moderators
INLretro Dumper-Programmer exits to command line
Anyone purchase the INLretro Dumper-Programmer (http://www.infiniteneslives.com/inlretro.php) and have luck getting passed to the main lua script as described in the readme? When I run inlretro.exe -s scripts\inlretro.lua from the host folder the program runs but always exits to the command line (regardless of the nes mapper selected) instead of control passing to the main lua script
Re: INLretro Dumper-Programmer exits to command line
A first step would be to naturally create a support ticket on his website. Nobody can help you better than the man himself.
Re: INLretro Dumper-Programmer exits to command line
True, but I think its worth seeing if anyone elee has gotten it to work and replicating (after all, maybe the device is working fine and I’m doing something wrong).
- Broke Studio
- Formerly glutock
- Posts: 181
- Joined: Sat Aug 15, 2015 3:42 pm
- Location: France
- Contact:
Re: INLretro Dumper-Programmer exits to command line
Can you post the output you get when running the command line ?
My first game : Twin Dragons available at Broke Studio.
Re: INLretro Dumper-Programmer exits to command line
DEBUG source/inlprog.c:172: flags= o:0 n:0 e:0 f:0 h:0 i:0 t:0 x:0 y:0 T:0
DEBUG source/inlprog.c:173: args= b:(null) c:(null) d:(null) m:(null) p:(null)
DEBUG source/inlprog.c:174: args= s:scripts\inlretro.lua v:(null) C:(null) L:(null) K:(null)
DEBUG source/inlprog.c:175: args= O:(null) P:(null) S:(null) W:(null)
Successfully found and connected to INL retro-prog
attempting to detect NES/FC mapper via mirroring...
1screen A mirroring sensed
MMC1 mirror test fail
could not write 0xAA to PPU $ 1000
EXP0 pull-up test: 224
reading PRG-ROM manf ID
attempted read PRG-ROM manf ID: 0
attempted read PRG-ROM prod ID: A5
reading CHR-ROM manf ID
attempted read CHR-ROM manf ID: 0
attempted read CHR-ROM prod ID: 0
(This is with "local cart_console = "NES"" and "local curcart = require "scripts.nes.mmc1"". Game is TMNT (1989 version), chose mmc1 because http://bootgod.dyndns.org:7777/profile.php?id=8 indicated it used that)
DEBUG source/inlprog.c:173: args= b:(null) c:(null) d:(null) m:(null) p:(null)
DEBUG source/inlprog.c:174: args= s:scripts\inlretro.lua v:(null) C:(null) L:(null) K:(null)
DEBUG source/inlprog.c:175: args= O:(null) P:(null) S:(null) W:(null)
Successfully found and connected to INL retro-prog
attempting to detect NES/FC mapper via mirroring...
1screen A mirroring sensed
MMC1 mirror test fail
could not write 0xAA to PPU $ 1000
EXP0 pull-up test: 224
reading PRG-ROM manf ID
attempted read PRG-ROM manf ID: 0
attempted read PRG-ROM prod ID: A5
reading CHR-ROM manf ID
attempted read CHR-ROM manf ID: 0
attempted read CHR-ROM prod ID: 0
(This is with "local cart_console = "NES"" and "local curcart = require "scripts.nes.mmc1"". Game is TMNT (1989 version), chose mmc1 because http://bootgod.dyndns.org:7777/profile.php?id=8 indicated it used that)
- Broke Studio
- Formerly glutock
- Posts: 181
- Joined: Sat Aug 15, 2015 3:42 pm
- Location: France
- Contact:
Re: INLretro Dumper-Programmer exits to command line
Are you using INL MMC1 board ?
My first game : Twin Dragons available at Broke Studio.
Re: INLretro Dumper-Programmer exits to command line
I do not know what "using INL MMC1 board" refers to. Just to clarify, my post was about reading from a cartridge (rather than writing to one). That said, are you referring to something in the inlretro.lua file that needs to be edited? Or are you referring to something else?glutock wrote:Are you using INL MMC1 board ?
- Broke Studio
- Formerly glutock
- Posts: 181
- Joined: Sat Aug 15, 2015 3:42 pm
- Location: France
- Contact:
Re: INLretro Dumper-Programmer exits to command line
In the inlretro.lua file, you should have lines with
All commented out except one.
Comment it, and add this :
Code: Select all
curcart.process(........
Comment it, and add this :
Code: Select all
curcart.process( true, true, false, false, false, "tmnt-dump.bin", "", "")
My first game : Twin Dragons available at Broke Studio.
Re: INLretro Dumper-Programmer exits to command line
Exactly the tip I needed, thanks greatly.glutock wrote:In the inlretro.lua file, you should have lines with
All commented out except one.Code: Select all
curcart.process(........
Comment it, and add this :
Code: Select all
curcart.process( true, true, false, false, false, "tmnt-dump.bin", "", "")