making a wai wai repro

Are you new to 6502, NES, or even programming in general? Post any of your questions here. Remember - the only dumb question is the question that remains unasked.

Moderator: Moderators

Post Reply
tomkennes
Posts: 3
Joined: Wed Feb 12, 2020 1:46 am

making a wai wai repro

Post by tomkennes » Wed Feb 12, 2020 1:50 am

Hi Guys,

I Want to make a wai wai world repro (3th try :s)

I applied translation patch and programmed the chr and prg and bought a famicom to nes converter.

Is there somebody here who can easily explain which pins I have to rewire to which holes?

I've already made repro's using regular boards, but konami boards are always a pain in the *ss.

Ty!

Ice Man
Posts: 494
Joined: Fri Jul 04, 2014 2:34 pm

Re: making a wai wai repro

Post by Ice Man » Wed Feb 12, 2020 3:36 am

If you have a multi meter by hand, check the connections from PRG/CHR ROM to the VRC.
Pinouts are all on the Wiki.

tomkennes
Posts: 3
Joined: Wed Feb 12, 2020 1:46 am

Re: making a wai wai repro

Post by tomkennes » Wed Feb 12, 2020 3:52 am

Hi thx,

I've found this rewiring VRC4 mapper 23

PRG
pin1 -> lift and leave floating
pin 2 -> hole 24
pin 24 -> GND
pin 31 -> 5V
pin 32 -> 5V

CHR
pin1 -> lift and leave floating
pin 2 -> hole 24
pin 24 -> GND
pin 31 -> 5V
pin 32 -> 5V

But because I have a VRC4 mapper 21

I also have to this:

(fr) CPU A2 -> |03 38| -> PRG A15 (r)
(fr) CPU A1 -> |04 37| <- CPU A12 (f)

 Can somebody just explain what this means? This is the only thing I'm missing I think? Is this correct?

Ice Man
Posts: 494
Joined: Fri Jul 04, 2014 2:34 pm

Re: making a wai wai repro

Post by Ice Man » Wed Feb 12, 2020 8:48 am

Pin 3 and 4 of VRC are different with some mappers/boards.
Just compare your board on the wiki with what the original board is and wire them accordingly.

tomkennes
Posts: 3
Joined: Wed Feb 12, 2020 1:46 am

Re: making a wai wai repro

Post by tomkennes » Wed Feb 12, 2020 10:49 am

Ok thx but I'm a total noob here. For example the last piece of my previous post I have to do something with pin 3/4 or hole I have no idea, but can't somebody here tell me exactly what to do with it 🤗?

Ice Man
Posts: 494
Joined: Fri Jul 04, 2014 2:34 pm

Re: making a wai wai repro

Post by Ice Man » Thu Feb 13, 2020 1:45 pm

Wiki: https://wiki.nesdev.com/w/index.php?title=VRC2_pinout

Wai Wai World PCB (350926): http://bootgod.dyndns.org:7777/profile.php?id=2274

PCB 350926:

Code: Select all

   (fr) CPU A1 -> |03  38| -> PRG A15 (r)
   (fr) CPU A0 -> |04  37| <- CPU A12 (f)
Now check your PCB type and compare. Solder Pin 3 and 4 accordingly.

Post Reply