Connect AY-3-8910 sound chip to FME-7 board

Discuss hardware-related topics, such as development cartridges, CopyNES, PowerPak, EPROMs, or whatever.

Moderators: B00daW, Moderators

mir2sila
Posts: 7
Joined: Tue Feb 05, 2019 1:25 pm

Re: Connect AY-3-8910 sound chip to FME-7 board

Post by mir2sila » Wed Apr 07, 2021 6:19 pm

l_oliveira wrote:
Wed Apr 07, 2021 6:51 am
The reason for that is that regular/classic TTL chips have a tendency to assume logic level 1 when unused inputs are left open. CMOS are more sensitive to signal due to it being based on a different type of transistor (bipolar on classic TTL vs mosfet on MOS/CMOS chips) which is a lot more sensitive to input signals. Pins being left disconnected will float and serve as antenna for external static charges. Hence why approaching the finger had the effect you described.
Wow, thanks for the clarification))

Post Reply