It is currently Mon Dec 10, 2018 8:46 am

All times are UTC - 7 hours





Post new topic Reply to topic  [ 14 posts ] 
Author Message
PostPosted: Fri Jul 13, 2012 11:21 pm 
Offline

Joined: Thu Jun 23, 2011 6:23 am
Posts: 4
what do I need stuff to burn nes carts


Top
 Profile  
 
PostPosted: Sat Jul 14, 2012 3:09 am 
Offline
User avatar

Joined: Thu Jan 19, 2006 5:08 pm
Posts: 753
Location: Shelton, Washington.
durten wrote:
what do I need stuff to burn nes carts


Simple Answer: a CopyNES and a computer with Windows XP...

Mild Answer: Chris Covell's NES Dumping program, Follow it carefully though!

Hard Answer: Build your own, If you study on a more modern method, Anything is possible!

_________________
AKA SmilyMZX/AtariHacker.


Top
 Profile  
 
PostPosted: Sat Jul 14, 2012 6:38 pm 
Offline
User avatar

Joined: Wed Dec 06, 2006 8:18 pm
Posts: 2827
durten wrote:
what do I need stuff to burn nes carts


An ignition source and fuel. Try gasoline and a match.


Top
 Profile  
 
PostPosted: Sun Jul 15, 2012 7:25 am 
Offline

Joined: Sat Sep 03, 2011 11:40 pm
Posts: 275
MottZilla wrote:
An ignition source and fuel. Try gasoline and a match.

And we have winner! clap clap clap :)


Top
 Profile  
 
 Post subject:
PostPosted: Sun Jul 15, 2012 8:45 am 
Offline

Joined: Wed Feb 15, 2012 10:19 pm
Posts: 86
Microwaves work good for that too and you get a miniature lightning show.


Top
 Profile  
 
PostPosted: Mon Jul 16, 2012 1:11 am 
Offline
User avatar

Joined: Wed Apr 07, 2010 1:14 am
Posts: 484
Location: Iran
durten wrote:
what do I need stuff to burn nes carts


First of all you need a (E)EPROM Programmer. You can buy it or make it.
If you want to make it yourself, I suggest to make this one :
Willem EPROM Programmer

Image


Top
 Profile  
 
 Post subject:
PostPosted: Mon Jul 16, 2012 5:29 am 
Offline

Joined: Wed Feb 15, 2012 10:19 pm
Posts: 86
I use a gq-4x. Bought off ebay. Works well.


Top
 Profile  
 
 Post subject:
PostPosted: Mon Jul 16, 2012 5:49 am 
Offline
User avatar

Joined: Sat Feb 12, 2005 9:43 pm
Posts: 11010
Location: Rio de Janeiro - Brazil
To avoid trouble, get a USB EPROM programmer, because the parallel port ones are a pain to get working sometimes, especially considering that parallel ports are becoming quite uncommon. Beware that some programmers are powered by a USB cable, but still need a parallel port connection to work.


Top
 Profile  
 
 Post subject:
PostPosted: Wed Jul 18, 2012 7:40 pm 
Offline

Joined: Tue Jan 13, 2009 12:57 pm
Posts: 23
tokumaru wrote:
To avoid trouble, get a USB EPROM programmer, because the parallel port ones are a pain to get working sometimes, especially considering that parallel ports are becoming quite uncommon. Beware that some programmers are powered by a USB cable, but still need a parallel port connection to work.


I bought a GQ-3X off MCUmall and it works perfectly for 8-bit wide OTPROMs and UVPROMs. It's USB controlled and powered and the software is flexible and stable.

I thought I was smart and built my own parallel port programmer that used software timing to pulse the EPROMs. It would write the first byte nicely, but not much after that. I spent a few days trying to fix it, gave up in frustration, and purchased the aforesaid model.


Top
 Profile  
 
 Post subject:
PostPosted: Thu Jul 19, 2012 5:51 am 
Offline

Joined: Thu Jun 23, 2011 6:23 am
Posts: 4
Thank you for all the answers can someone link the stuff I need


Top
 Profile  
 
 Post subject:
PostPosted: Thu Jul 19, 2012 9:44 am 
Offline
User avatar

Joined: Sat Feb 12, 2005 9:43 pm
Posts: 11010
Location: Rio de Janeiro - Brazil
can you use punctuation it would show that you're actually putting some effort into this and will make the stuff you write less annoying to read

EDIT: If your only intention is to make carts for the NES (and other 8-bit consoles), there's no need to be picky about the EPROM programmer. Any programmer will work with the common chips you'll be using, so you can just browse online for whatever is more convenient to you. My only recommendation, like I said before, is that you get a true USB programmer.

The rest of the stuff is pretty common and easy to find in physical stores: soldering iron, solder, multimeter... and don't forget the donor carts.


Top
 Profile  
 
 Post subject:
PostPosted: Sat Jul 21, 2012 5:47 am 
Offline

Joined: Thu Jun 23, 2011 6:23 am
Posts: 4
the donor carts do I need to do-The Legend of Zelda: Outlands or Sweet Home where can I download some labels


Top
 Profile  
 
 Post subject:
PostPosted: Sat Jul 21, 2012 9:54 am 
Offline
User avatar

Joined: Wed Dec 06, 2006 8:18 pm
Posts: 2827
http://www.retrousb.com/product_info.ph ... ucts_id=43


Top
 Profile  
 
 Post subject:
PostPosted: Sat Jul 21, 2012 11:00 am 
Offline
Formerly 65024U

Joined: Sat Mar 27, 2010 12:57 pm
Posts: 2264
http://bootgod.dyndns.org:7777/profile.php?id=519

Any SNROM I believe, if so, that's your best (cheapest and crappiest) game to do it.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 14 posts ] 

All times are UTC - 7 hours


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group