It is currently Mon Nov 11, 2019 11:34 pm

All times are UTC - 7 hours





Post new topic Reply to topic  [ 8 posts ] 
Author Message
PostPosted: Thu May 16, 2019 6:40 am 
Offline

Joined: Sun Jun 12, 2011 12:06 pm
Posts: 587
Location: Poland
I accidentally got into possesion of this version so I put photos + reverse-engineered schematic.
Image Image Image Image Image Image Image

I also rev-en NES (I know there are many schematics but none of them seemed readably to me):
Image Image Image Image


Last edited by krzysiobal on Sat May 18, 2019 3:17 am, edited 1 time in total.

Top
 Profile  
 
PostPosted: Thu May 16, 2019 2:26 pm 
Offline
User avatar

Joined: Tue Mar 22, 2016 8:27 pm
Posts: 364
Location: Minnesota, USA
That is pretty awesome, I have never heard of this before. Basically it has a composite to RGB adapter built-in, interesting. I guess this was intended for use with SCART? Have you tried the RGB video / how does it look?

Edit:

Is this an SNES-style port -- are they compatible?
Image

Image


Top
 Profile  
 
PostPosted: Thu May 16, 2019 2:38 pm 
Offline

Joined: Sun Apr 13, 2008 11:12 am
Posts: 8665
Location: Seattle
Ben Boldt wrote:
I guess this was intended for use with SCART?
Yes, it was, because France was SECAM, and didn't support PAL. So they added a special ASIC from Sony, evidently, that demodulated PAL and emitted RGBS.
Quote:
Have you tried the RGB video / how does it look?
I've seen people say it's not very good.

Quote:
Is this an SNES-style port -- are they compatible?
No, neither geometry nor pin position. Physically it's more shaped like the FDS data cable.


Top
 Profile  
 
PostPosted: Thu May 16, 2019 3:06 pm 
Offline

Joined: Wed Mar 09, 2005 9:08 am
Posts: 466
lidnariq wrote:
Ben Boldt wrote:
Quote:
Is this an SNES-style port -- are they compatible?
No, neither geometry nor pin position. Physically it's more shaped like the FDS data cable.


I have one of these NES's and seem to recall that - to my surprise - the cable is not just similar to the FDS, but fitted perfectly. Maybe not much of a surprise that one proprietary connector gets re-used for multiple purposes...


Top
 Profile  
 
PostPosted: Fri May 17, 2019 5:51 am 
Offline

Joined: Wed Aug 01, 2018 7:15 am
Posts: 1
Bananmos wrote:
I have one of these NES's and seem to recall that - to my surprise - the cable is not just similar to the FDS, but fitted perfectly. Maybe not much of a surprise that one proprietary connector gets re-used for multiple purposes...

That actually is a surprise - you want to make it hard for a user to connect the wrong thing. Reusing the connector risks someone connecting the wrong thing, and damaging either the control deck or the connected equipment.


Top
 Profile  
 
PostPosted: Fri May 17, 2019 6:43 am 
Offline

Joined: Sun Sep 19, 2004 11:12 pm
Posts: 21676
Location: NE Indiana, USA (NTSC)
I'm guessing Nintendo found the reuse acceptable because the Famicom Disk System wasn't sold in France, and the French NES wasn't sold in Japan. In addition, an NES power supply will damage a Famicom (though a Famicom or Mega Drive/Genesis power supply will safely power either). By the Super Famicom/Super NES era, Nintendo did change up the video output connector in the same way that it changed the Game Link connector from the Game Boy Pocket and Game Boy Color to the Game Boy Advance: from two rounded corners and two square corners to four rounded corners and a keying tooth centered on one side. (The North American Super NES's power connector was also changed.)

_________________
Pin Eight | Twitter | GitHub | Patreon


Top
 Profile  
 
PostPosted: Fri May 17, 2019 10:35 am 
Offline

Joined: Sun Apr 13, 2008 11:12 am
Posts: 8665
Location: Seattle
To quickly make a cartoon of the French NES AV socket:
Code:
Card edge with beveled shroud
+-----+
|JIHGF|  = cRGBS
\EDCBA/  = AgggT
 +---+
view from outside console

c = "select" = I assume this is SCART p. 16; the number is cropped out of krzysiobal's schematic.
T = "status" = SCART p. 8, where 9-12V=AV mode
RGBS = red, green, blue, composite sync
A = mono audio


Top
 Profile  
 
PostPosted: Sat May 18, 2019 3:26 am 
Offline

Joined: Sun Jun 12, 2011 12:06 pm
Posts: 587
Location: Poland
Quote:
c = "select" = I assume this is SCART p. 16; the number is cropped out of krzysiobal's schematic.

Yes indeed p.16, I fixed the schematics. So you found bug in the EAGLE PCB software that ignores text and takes only lines in account when calculating dimension of schematic's oputput image.

Quote:
Have you tried the RGB video / how does it look?


I can't answer - this SONY chip was probably broken because it did not ouput any signal at all. I checked video at its inputs and:
*LUMA VIDEO IN (pin 27) was not changing at all on both sides of C20 capacitor, but was present on upper side of R5 resistor.
*CHROMA IN (pin 24) was ok
so probably some kind of internal short in the chip.

I modified the console to output composite video instead, using existing cable - by forcing composite video in place of sync signal and GND for SELECT.

BTW. I did not analyze the STATUS/ASPECT but it looks like utilizing the 9VAC signal from power supply. I thought before that every NES/SNES can be powered without harm with 9V DC (with the exception of rectifier bridge being quite hot)


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 8 posts ] 

All times are UTC - 7 hours


Who is online

Users browsing this forum: No registered users and 3 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group