nesdev.com

As far as I can tell, the game writes: * cipher[bank] to $4A00+cipher[bank] (where those values range from 0xB2 through 0xCE) * cipher[bank] to $6E36 * bank to $6000 * mirror to $C0FF There is a plain UNROM mapper hack of the game present in GoodNES, which seems to work but has conspicuous glitches...

Why not ask cah4e3 for the PCB diagram?

This card piracy has a total of three versions

1. The Kaiser

2. The Whirlwind Manu

3. The same mapper as the original

95CE148A is ok

using Nestopia Plus! load rom ,see info

1. Detect the contact between goldfinger and slot 2. Check the power supply system of the console Although the DIP chip card is very expensive in China, it is only suitable for collection, because some of the large number of DIP chip CARDS are on low voltage machines, the execution is problematic 1....

This card is different from UxROM

UxROM, switch 8000, 16K data, using address 8000-FFFF

KS7013B, switch 8000,16 K data, using addresss 6000-7FFF

And 8000-FFFF is the control of mirr

这个是昨天我朋友寄给我，让我DUMP的，目前ROM已由他发布，卡带我寄回了

我没有拆卡，在中国，卡带不是自己的，不能随意拆开，看一下，一样一样知道规格

miss 512k

using mmc3 version.

Thanks to zxbdragon photos I was able to rev-en this PCB. Surprisingly I was almost 100% accurate with my guesses, here are differences: * CHR-ROM order is 100069C + 100068C, not vice versa * MJ338986 is 74191 with CLK and /CNTEN pins swapped (pin4=CLK, pin14=/CNTEN) * $600A.0 must be written with ...

Ben Boldt wrote:

zxbdragon wrote:After I get divorced, I'll scan your PCB

It's unfortunate to marry such a bitch

HAHahahah

Careful she doesn't take half of the PCB.

I lost 2 million RMB.

She scorned the rubbish

After I get divorced, I'll scan your PCB

It's unfortunate to marry such a bitch

Circuit reason? My best guess is that something is delaying the output of PRG ROM substantially, relative to the original cart. When the Game Genie has a password that relies on a "compare" byte, there is some sort of timer inside the Game Genie that it uses to detect when it should emit its replac...

We don't know how the Game Genie handles the race-y analog "detect the current ROM output value"... Maybe the reproduction here has some sort of timing problem? If so, since your GG codes are in the FCG's fixed bank, you could try removing the compare part of the GG code: OXVSKSIV → OXTSKS NNVSSIZX...

Menu can display

GG code can be entered

But GG code does not work