Search found 159 matches

by icemanxp300
Fri Mar 25, 2016 6:19 pm
Forum: Reproduction
Topic: Cheaper alternative to am29F032 or better place to buy
Replies: 7
Views: 4237

Re: Cheaper alternative to am29F032 or better place to buy

Ice Man wrote:MBM29F033C works well. Same pinout, cheaper and works with buyic's adapter type III, too!
Nice. I'll give them a shot. 20 for $96 is a lot better than 20 for $185
by icemanxp300
Fri Mar 25, 2016 3:29 pm
Forum: Reproduction
Topic: Cheaper alternative to am29F032 or better place to buy
Replies: 7
Views: 4237

Cheaper alternative to am29F032 or better place to buy

Just wondering if there is a cheaper alternative to these chips or a place that sells them cheaper than $10+ each. If there is an alternative would they work with buy ic's adapter board? Buyic is always out of these chips as well.

The best price I can come up with is about $9.29 each buying 10+
by icemanxp300
Fri Mar 11, 2016 10:35 am
Forum: General Stuff
Topic: Generic Ceramic paper filters for desolder guns.
Replies: 0
Views: 3507

Generic Ceramic paper filters for desolder guns.

Ok so I am trying to gauge if there is will bean interest for these. I have found that these are overpriced at $10 for 10 filters. So I have researched the material a bit and found a nice substitute. Not sure if it is the same stuff as Hakko uses or not. This stuff can withstand like 1200+ degrees. ...
by icemanxp300
Thu Mar 10, 2016 6:43 pm
Forum: Reproduction
Topic: Genesis reproduction problems.
Replies: 17
Views: 8292

Re: Genesis reproduction red screens? Region problems?

I make my own problems......

I was looking at the wrong pin-outs. pin 42 is actually a19 not pin 1 lol.

So as a correction the game works fine now. On my test board it is already set-up properly. I'm not sure what I did wrong the 1st time but the game works now and the master code is not required.
by icemanxp300
Thu Mar 10, 2016 4:47 pm
Forum: Reproduction
Topic: Genesis reproduction problems.
Replies: 17
Views: 8292

Re: Genesis reproduction red screens? Region problems?

Yeah this is kicking my ass. I have tried everything. I think these roms need padded. I read they don't but I have not got any game to work on a bigger size rom. I'm going to have to get some 27c800 and try that. I have the master key of DABT-AA7E. While I did find the information on adding the mast...
by icemanxp300
Wed Mar 09, 2016 10:13 am
Forum: Reproduction
Topic: Genesis reproduction problems.
Replies: 17
Views: 8292

Genesis reproduction problems.

I know this isn't Nintendo but the people here are crazy intelligent/informed on this stuff so hoping someone can help :) Ok so I have been doing some genesis lately and I encountered this problem 1st on a Mega Man Wily Wars. I had downloaded a pal rom and of course it did not load, just a black scr...
by icemanxp300
Sun Mar 06, 2016 8:52 am
Forum: Reproduction
Topic: Donor cart for Mega Man Wily Wars/Rockman Mega World
Replies: 28
Views: 18803

Re: Donor cart for Mega Man Wily Wars/Rockman Mega World

I forget which, but there are lots of sports games with the usual SRAM mapping scheme that you can find for a dollar easily. I have a few in my parts bin so if I find one I'll pull it out and check which game it is. The donor I used has sram. I actually have a game store near me that has tons of th...
by icemanxp300
Fri Mar 04, 2016 8:28 am
Forum: Reproduction
Topic: Donor cart for Mega Man Wily Wars/Rockman Mega World
Replies: 28
Views: 18803

Re: Donor cart for Mega Man Wily Wars/Rockman Mega World

Edit *sorry didn't even pay attention this wasn't in the reproduction section* Figure it's best to bump this rather than start a new thread. Just curious is it just me or does this game suffer slow down on a cart? I tried the "E" rom and that doesn't work just black screen after produced by sega. So...
by icemanxp300
Thu Mar 03, 2016 10:03 pm
Forum: Reproduction
Topic: wiring UOROM
Replies: 4
Views: 5272

Re: wiring UOROM

I don't think anyone is going to help you make a Battle Kid reproduction. It's against the first rule of this board. Sometimes it is hard to know what is free public and what isn't. I read this post yesterday and did a quick search for Battlekid and got this immediately. "Battle Kid: Fortress Of Pe...
by icemanxp300
Tue Feb 23, 2016 7:37 am
Forum: Reproduction
Topic: Putting PAL SNES games on NTSC donors
Replies: 13
Views: 6319

Re: Putting PAL SNES games on NTSC donors

qwertymodo wrote:I think you might need a PAL CIC, or it won't boot.

It boots just fine. Everything works fine except the menu selection highlights weird. So far that is the only problem I have encountered. I was just curious if it might give problems later in the game.
by icemanxp300
Mon Feb 22, 2016 8:36 pm
Forum: Reproduction
Topic: Putting PAL SNES games on NTSC donors
Replies: 13
Views: 6319

Putting PAL SNES games on NTSC donors

Just curious if there are any problems with this. I put a PAL game on a NTSC cart today. Rom plays on snes9x just fine and once on the cart the game appears to play fine as well. The problem I seen was on the menu screen not all the menu choices highlight properly as they do is snes9x. While you can...
by icemanxp300
Sat Feb 20, 2016 7:16 am
Forum: Reproduction
Topic: super mario all star levels
Replies: 17
Views: 7884

Re: super mario all star levels

When I used Famirom to split it I chose change eprom target size to 64k instead of 32k or 27c512 instead of 27c256. I just check the code and on the 32 prg file it stops at 07ff0. I checked the code on the 64k prg file and it starts duplicating at 08000. So I am fairly sure it duplicated correctly. ...
by icemanxp300
Sat Feb 20, 2016 12:09 am
Forum: Reproduction
Topic: super mario all star levels
Replies: 17
Views: 7884

Re: super mario all star levels

In this case, the "digital magnitude comparator" is just a clever trick :p It tentatively looks like a CNROM-368 build is actually feasible in this case, as I just modified a copy of fceu to support it to test. To make the PRG image to burn, you'd want to pad the original 32 KiB of PRG up to 64 KiB...
by icemanxp300
Fri Feb 19, 2016 10:37 pm
Forum: Reproduction
Topic: super mario all star levels
Replies: 17
Views: 7884

Re: super mario all star levels

Unfortunately I am not on this level yet. Now you have me trying to understand what a digital magnitude comparator is. Not to mention having to rearrange the code before programming. What has this thread got me into LOL.
by icemanxp300
Fri Feb 19, 2016 9:57 pm
Forum: Reproduction
Topic: super mario all star levels
Replies: 17
Views: 7884

Re: super mario all star levels

What about the ffe file that gets seperated? Does that not contain information relevant to the game? I am assuming here that w/out that file the game will not work.