目前在学习这些,有谁有源码或资料的发下,谢谢!

Chinese-language board. 为NES/FC开发商的中国语言论坛 | 為NES/FC開發商的中國語言論壇

Moderator: Moderators

Post Reply
User avatar
zgh4000
Posts: 29
Joined: Tue May 30, 2006 10:11 am

目前在学习这些,有谁有源码或资料的发下,谢谢!

Post by zgh4000 »

乘除法
16位运算
定点坐标显示子程序
随机函数
时间
......

时间我已经做出来了。
原理是NTSC制式下每秒60帧,即刷60次。
我在每个VBLINK期间引发的NMI中断加1,加到60的时候就是1秒了。
同理PAL是50次。 :)

随机函数:
rand:
CLC ; C=0
LDA $6003 ; A=$6003
ADC $6004 ; A+=$6004
STA $6004 ; $6004=A
ADC $6005 ; A+=$6005
STA $6005 ; $6005=A
ADC $6006 ; A+=$6006
STA $6006 ; $6006=A
CLC ; C=0
LDA $6003 ; A=$6003
ADC #$27 ; A+=27
STA $6003 ; $6003=A
LDA $6004 ; A=$6004
ADC #$59 ; A+=59
STA $6004 ; $6004=A
PHA ; A入栈
LDA $6005 ; A=$6005
ADC #$41 ; A+=41
STA $6005 ; $6005=A
AND #$7F ; A&=7F
TAX ; X=A
LDA $6006 ; A=$6006
ADC #$31 ; A+=31
STA $6006 ; $6006=A
PLA ; A出栈
RTS

SRAM选上
$6003
$6004
$6005
$6006
每回数据随机,可以自己写比上面更简单的代码。
Last edited by zgh4000 on Sun Jun 11, 2006 10:23 am, edited 2 times in total.
tpu
Posts: 9
Joined: Sat Nov 05, 2005 6:38 pm
Location: china

Post by tpu »

随机数算法一般都是给一个种子,即初始值,然后返回一系列的伪随机数。只要种子一样,产生的结果就一样。把地址放在sram里面,可以保证种子每次开机都不一样。

乘除法我写过一些,这里不能上传。改天发给你研究。
User avatar
zgh4000
Posts: 29
Joined: Tue May 30, 2006 10:11 am

Post by zgh4000 »

tpu wrote:随机数算法一般都是给一个种子,即初始值,然后返回一系列的伪随机数。只要种子一样,产生的结果就一样。把地址放在sram里面,可以保证种子每次开机都不一样。

乘除法我写过一些,这里不能上传。改天发给你研究。
乘法我是这样理解的。
循环加运算
除法则是循环减运算。
是偶数的话可以用移位来提高效率。不知道你的代码是这个原理吗?
发我邮箱吧。
Last edited by zgh4000 on Fri Jun 09, 2006 9:40 pm, edited 2 times in total.
User avatar
zgh4000
Posts: 29
Joined: Tue May 30, 2006 10:11 am

Post by zgh4000 »

16位运算
最近研究后发现也很简单,利用进位判断可以容易做到.

定点坐标显示子程序
发现要实现他,要用到16位运算 和乘法。^_^
tpu
Posts: 9
Joined: Sat Nov 05, 2005 6:38 pm
Location: china

Post by tpu »

我直接贴上来:
math.asm
--------8<----------------------------

Code: Select all


.dataseg
	;math
	.public mtht0 .byte
	.public mtht1 .byte
	.public mtht2 .byte
	.public mtht3 .byte
	;result
	.public mthr0 .byte
	.public mthr1 .byte
	.public mthr2 .byte
	.public mthr3 .byte
.codeseg

.extrn str_addr : byte

;;
;; 24bitx8bit->24bit
;;    mtht[210] x a => mthr[210]
;;
.proc mul24x8

	sta mtht3
	txa
	pha

	lda #$00
	sta mthr0
	sta mthr1
	sta mthr2
	tax

-:	lda #$01
	and mtht3
	beq +

	clc
	lda mthr0
	adc mtht0
	sta mthr0
	lda mthr1
	adc mtht1
	sta mthr1
	lda mthr2
	adc mtht2
	sta mthr2

+:	cpx #$07
	beq +

	clc
	rol mtht0
	rol mtht1
	rol mtht2
	clc
	ror mtht3
	inx
	jmp -

+:	pla
	tax
	rts	
.endp

;;
;; 24bit/16bit => 24bit,16bit
;;    mtht[210] / mthr[10] => mtht[210], mthr[32]
;;

.proc div24d16
	txa
	pha

	lda #$00
	sta mthr2
	sta mthr3
	ldx #$18

-:	clc
	rol mtht0
	rol mtht1
	rol mtht2
	rol mthr2
	rol mthr3
	bcs +

	lda mthr3
	cmp mthr1
	bne +
	lda mthr2
	cmp mthr0
+:	bcc +
	sec
	lda mthr2
	sbc mthr0
	sta mthr2
	lda mthr3
	sbc mthr1
	sta mthr3
	lda mtht0
	ora #$01
	sta mtht0

+:	dex
	bne -

	pla
	tax
	rts
.endp


;;
;; 24bit/8bit => 24bit,8bit
;;    mtht[210] / a => mtht[210], mtht[3]
;;
.proc div24d8
	sta str_addr
	txa
	pha

	lda #$00
	sta mtht3
	ldx #$18

-:	clc
	rol mtht0
	rol mtht1
	rol mtht2
	rol mtht3
	lda mtht3
	bcs ++
	cmp str_addr
	bcc +

++:	sec
	sbc str_addr
	sta mtht3
	lda mtht0
	ora #$01
	sta mtht0

+:	dex
	bne -

	pla
	tax
	rts
.endp

;;
;; 24bit+8bit => 24bit
;;    x[210] + a => x[210]
;;
.proc add24a8
	clc
	adc $00,x
	sta $00,x
	lda $01,x
	adc #$00
	sta $01,x
	lda $02,x
	adc #$00
	sta $02,x
	rts
.endp

;;
;; 24bit-8bit => 24bit
;;    x[210] - a => x[210]
;;
.proc sub24s8
	sta str_addr
	sec
	lda $00,x
	sbc str_addr
	sta $00,x
	lda $01,x
	sbc #$00
	sta $01,x
	lda $02,x
	sbc #$00
	sta $02,x
	rts
.endp

.public mul24x8, div24d8, div24d16, add24a8, sub24s8


User avatar
zgh4000
Posts: 29
Joined: Tue May 30, 2006 10:11 am

Post by zgh4000 »

谢了,
不知道你对光枪有没研究?
tpu
Posts: 9
Joined: Sat Nov 05, 2005 6:38 pm
Location: china

Post by tpu »

光枪你知道原理的话,编程实现应该很容易的
luoli83
Posts: 1
Joined: Thu Jun 01, 2006 4:00 pm

Post by luoli83 »

Will....... I really can not understand how NES works, it's just too complex.
I mean I can not manage asm will. so I tend to learn gameboy dev. Any way, the lay out of gameboy Ram is very similar as NES.
User avatar
zgh4000
Posts: 29
Joined: Tue May 30, 2006 10:11 am

Post by zgh4000 »

tpu wrote:光枪你知道原理的话,编程实现应该很容易的
可以用NNNesterj做出来
但是没能自动检测出接了光枪,必须手动选择。
你对vnes模拟器比较熟悉,麻烦你看下源代码,什么原因。
Post Reply