NES output resolution
Moderator: Moderators
Re: NES output resolution
That said, you could make a filter that comes very close to looking like what one particular CRT could look like, especially with the monitor resolutions that are available today.
And I think there are actually already some very good ones out there.
But at least we can all agree that just drawing a black line every second line isn't the way to go.
And I think there are actually already some very good ones out there.
But at least we can all agree that just drawing a black line every second line isn't the way to go.
Re: NES output resolution
So basically you're saying that 4k resolution finally have an usage other than pure commercial?Sumez wrote:That said, you could make a filter that comes very close to looking like what one particular CRT could look like, especially with the monitor resolutions that are available today.
Re: NES output resolution
Even a 720p TV should be able to give a passable simulation of beam spreading at 3x zoom.
-
- Posts: 3140
- Joined: Wed May 19, 2010 6:12 pm
Re: NES output resolution
I think emulated scan lines look way too dark. If a CRT has dark spaces between lines, the lines are usually bright enough to compensate for it. On an LCD you can't have black and white stripes and still make it look white.
- rainwarrior
- Posts: 8734
- Joined: Sun Jan 22, 2012 12:03 pm
- Location: Canada
- Contact:
Re: NES output resolution
Yes, this is a very important aspect of it. If the beam isn't interlacing it is concentrating twice as much light on half the space (i.e. no change in overall intensity vs. interlaced mode). There is no equivalent range of intensity on an LCD with emulated scanlines. Plus CRTs are brighter than LCDs just as a baseline factor, even before taking into account scanlines.psycopathicteen wrote:If a CRT has dark spaces between lines, the lines are usually bright enough to compensate for it. On an LCD you can't have black and white stripes and still make it look white.
- mikejmoffitt
- Posts: 1353
- Joined: Sun May 27, 2012 8:43 pm
Re: NES output resolution
The "solution" is to just have a cranked up LCD backlight, but that's kind of janky. No matter how you look at it, emulating scanlines sacrifices total luminosity.rainwarrior wrote:Yes, this is a very important aspect of it. If the beam isn't interlacing it is concentrating twice as much light on half the space (i.e. no change in overall intensity vs. interlaced mode). There is no equivalent range of intensity on an LCD with emulated scanlines. Plus CRTs are brighter than LCDs just as a baseline factor, even before taking into account scanlines.psycopathicteen wrote:If a CRT has dark spaces between lines, the lines are usually bright enough to compensate for it. On an LCD you can't have black and white stripes and still make it look white.
To say CRTs are brighter than LCDs is a bit of an umbrella statement that's untrue in a lot of cases, but your average CRT TV / 15Khz monitor in good shape will be very bright. A PC CRT is often quite a bit dimmer.
For what it's worth, this is what a nearly NOS 32" tube looks like - and it's not a PVM, or other fancy broadcast video monitor. Just a big honking slot mask curved tube.
(Using a game I expect most people here to recogniz!)
- rainwarrior
- Posts: 8734
- Joined: Sun Jan 22, 2012 12:03 pm
- Location: Canada
- Contact:
Re: NES output resolution
Yeah, I was overstating it a little but I did mean in general, and I was a little bit conflating with contrast, i.e. turning up the backlight will also noticably raise the black level. ...but some LCDs are better than others, of course, and the technology has improved over the years.mikejmoffitt wrote:The "solution" is to just have a cranked up LCD backlight, but that's kind of janky. No matter how you look at it, emulating scanlines sacrifices total luminosity.
To say CRTs are brighter than LCDs is a bit of an umbrella statement that's untrue in a lot of cases, but your average CRT TV / 15Khz monitor in good shape will be very bright. A PC CRT is often quite a bit dimmer.
Re: NES output resolution
Take a look at this zoom up of a Pac-Man CRT.
It appears to have horizontal scanlines. But, if you look closely, that effect is actually a consequence of the delta-gun shadow mask and phosphor dot layout. In fact, the monitor is rotated 90 degrees; the electron gun is actually sweeping vertically. I bring this up to point out that "scanlines" are not just the result of highly focused beams.
It appears to have horizontal scanlines. But, if you look closely, that effect is actually a consequence of the delta-gun shadow mask and phosphor dot layout. In fact, the monitor is rotated 90 degrees; the electron gun is actually sweeping vertically. I bring this up to point out that "scanlines" are not just the result of highly focused beams.
- mikejmoffitt
- Posts: 1353
- Joined: Sun May 27, 2012 8:43 pm
Re: NES output resolution
Scanlines are literally the result of focused beams. Those horizontal lines are as you mentioned just a result of the phosphor layout, and aren't scanlines.
Re: NES output resolution
Sure, but his point is that the phosphor layout is also a visible artifact, and the individual phosphor elements are often large enough to be important to the correct emulation of scanlines.
I mean, not on a Trinitron tube (or my TV). But for anything with the more conventional triangular electron gun arrangement...
I mean, not on a Trinitron tube (or my TV). But for anything with the more conventional triangular electron gun arrangement...
Re: NES output resolution
I never actually considered that detail, so it's cool to have pointed out.
What a horrible monitor in that image, though I don't think I've ever seen Pac-Man looking that blurry.
What a horrible monitor in that image, though I don't think I've ever seen Pac-Man looking that blurry.
Re: NES output resolution
Here are a few more Pac-Man pics:
https://i.imgur.com/mC1VCf8.jpg
https://i.imgur.com/qBhnD3z.jpg
https://i.imgur.com/75VOAMw.jpg
https://i.imgur.com/nHumYlc.jpg
https://i.imgur.com/ST5974d.jpg
https://i.imgur.com/Q9UBSCU.jpg
https://i.imgur.com/mDcgJw8.jpg
Apparently, it's an in-line color mask, not delta format. The pic posted earlier in this thread was apparently too blurry. Though, I have seen machines where the pseudo-horizontal-scanlines were highly pronounced with clear gaps between the rows.
Also, I always wondered why a brick pattern is used as opposed to what you see in Trinitron monitors. Was it due to technological limitations or was it an attempt to reduce visible scanlines?
https://i.imgur.com/mC1VCf8.jpg
https://i.imgur.com/qBhnD3z.jpg
https://i.imgur.com/75VOAMw.jpg
https://i.imgur.com/nHumYlc.jpg
https://i.imgur.com/ST5974d.jpg
https://i.imgur.com/Q9UBSCU.jpg
https://i.imgur.com/mDcgJw8.jpg
Apparently, it's an in-line color mask, not delta format. The pic posted earlier in this thread was apparently too blurry. Though, I have seen machines where the pseudo-horizontal-scanlines were highly pronounced with clear gaps between the rows.
Also, I always wondered why a brick pattern is used as opposed to what you see in Trinitron monitors. Was it due to technological limitations or was it an attempt to reduce visible scanlines?