Hi,
I am trying make a reproduction cartridge for Hot Dance 2000 (I guess technically its not a repro!)
I was following a guide here: https://thepoorstudenthobbyist.com/2017 ... cartridge/
However, it looks like it has a PRG size of 512KB and uses an AxROM board. After a little research online, im not quite sure how this can be done.
I reached out to Retroblaster and another board maker, but it seems like a special case. I cannot find a board or a donor that would work.
Any ideas on this endeavor?
Thank you in advance
Writing Hot Dance 2000
Moderators: B00daW, Moderators
Forum rules
1. NO BLATANT PIRACY. This includes reproducing homebrew less than 10 years old, with the exception of free software.
2. No advertising your reproductions, with the exception of free software.
3. Be nice. See RFC 1855 if you aren't sure what this means.
1. NO BLATANT PIRACY. This includes reproducing homebrew less than 10 years old, with the exception of free software.
2. No advertising your reproductions, with the exception of free software.
3. Be nice. See RFC 1855 if you aren't sure what this means.
Re: Writing Hot Dance 2000
Assuming that it really is 512KB ANROM, you'll need to
1- either add a second 74'161 (to have two on the board) or replace it with a 74'377
2- Some rework to connect either CPU D3 or CPU D4 to either PRG A18 or CIRAM A10, depending on whether your board has jumpers for BNROM
1- either add a second 74'161 (to have two on the board) or replace it with a 74'377
2- Some rework to connect either CPU D3 or CPU D4 to either PRG A18 or CIRAM A10, depending on whether your board has jumpers for BNROM
-
- Posts: 2
- Joined: Fri Jan 29, 2021 5:24 am
Re: Writing Hot Dance 2000
ahh I think it's a little outside of my skillset I'm afraid
I appreciate the response all the same!
I appreciate the response all the same!