Punch Out Cartridge have only TTLs instead of MMC2!
Moderator: Moderators
Re: Punch Out Cartridge have only TTLs instead of MMC2!
@ Lord Nightmare
I can only use 4shared, other uploading sites are censored by gov
@ lidnariq
It is ok with me for sure.
I traced it too, but I haven't tested it yet.
I can only use 4shared, other uploading sites are censored by gov
@ lidnariq
It is ok with me for sure.
I traced it too, but I haven't tested it yet.
- Attachments
-
- MMC2.zip
- (3.39 MiB) Downloaded 401 times
Re: Punch Out Cartridge have only TTLs instead of MMC2!
Here's the 3 most useful of the 4 images.
Unfortunately, the gimp XCF really doesn't compress well at all; it's still 13MB so I think I'll hold off uploading it ... unless someone tells me they want it.
Unfortunately, the gimp XCF really doesn't compress well at all; it's still 13MB so I think I'll hold off uploading it ... unless someone tells me they want it.
-
- Posts: 131
- Joined: Wed Apr 05, 2006 10:12 am
- Location: PA, USA
- Contact:
Re: Punch Out Cartridge have only TTLs instead of MMC2!
The gimp .xcf file with the board tracing would indeed be very useful.
LN
LN
"When life gives you zombies... *CHA-CHIK!* ...you make zombie-ade!"
Re: Punch Out Cartridge have only TTLs instead of MMC2!
When I say "trace" I meant "labelled", with unique letters at each of the vias.... like this:(I'm just being hesitant because my upstream is annoyingly small, so I want to make sure it's useful/interesting)
If that still sounds useful, I'll put it up on mega, or something. Re: Punch Out Cartridge have only TTLs instead of MMC2!
Labelled picture is useful definitely.
But I think schematic is more useful.
And we already have three MMC2 schematics.
But I think schematic is more useful.
And we already have three MMC2 schematics.
-
- Posts: 131
- Joined: Wed Apr 05, 2006 10:12 am
- Location: PA, USA
- Contact:
Re: Punch Out Cartridge have only TTLs instead of MMC2!
lidnariq: yes, that does sound useful, since it acts itself as a partial schematic.
LN
LN
"When life gives you zombies... *CHA-CHIK!* ...you make zombie-ade!"
- mikejmoffitt
- Posts: 1353
- Joined: Sun May 27, 2012 8:43 pm
Re: Punch Out Cartridge have only TTLs instead of MMC2!
The midway would be to label nets on the PCB to match a schematic.
Re: Punch Out Cartridge have only TTLs instead of MMC2!
Thanks for sharing, Farid! I just can't see to get the file to work.
A mirror would be highly appreciated! That site never works no matter what your browser's settings. All buttons lead to malware attempts. It's gotten even worse since that was originally posted. Does anyone have a mirror, please?
Oh wait, those images work well enough. I just didn't try viewing them fullscreen. Sorry, hehe.
A mirror would be highly appreciated! That site never works no matter what your browser's settings. All buttons lead to malware attempts. It's gotten even worse since that was originally posted. Does anyone have a mirror, please?
Oh wait, those images work well enough. I just didn't try viewing them fullscreen. Sorry, hehe.
Idealogical
From: I have an idea. It seems logical. Thus everyone must agree.
Fail, fail, fail again. Keep trying, then maybe this damn thing will work. Eventually you might even know why it worked.
From: I have an idea. It seems logical. Thus everyone must agree.
Fail, fail, fail again. Keep trying, then maybe this damn thing will work. Eventually you might even know why it worked.
- krzysiobal
- Posts: 1036
- Joined: Sun Jun 12, 2011 12:06 pm
- Location: Poland
- Contact:
Re: Punch Out Cartridge have only TTLs instead of MMC2!
FARID
Can share the data in the cart?
Can share the data in the cart?
Re: Punch Out Cartridge have only TTLs instead of MMC2!
The EPROM's were damaged, so I couldn't dump them.zxbdragon wrote:FARID
Can share the data in the cart?
But as I tested Punch-Out!! (U) [!].nes worked fine on the cartridge.
- zoinknoise
- Posts: 50
- Joined: Fri Mar 04, 2016 9:43 am
- Location: Ice Cream Island
Re: Punch Out Cartridge have only TTLs instead of MMC2!
sorry to bump an old thread but i didn't think a new one was warranted.
i have this cart in working condition. after dumping, i can confirm both ROMs are identical to the retail PRG0 version of Mike Tyson's Punch-Out. (Mike Tyson's Punch-Out!! (JU) (PRG0) [!].nes)
prg: 8DB6D11F
chr: 570B48EA
i have this cart in working condition. after dumping, i can confirm both ROMs are identical to the retail PRG0 version of Mike Tyson's Punch-Out. (Mike Tyson's Punch-Out!! (JU) (PRG0) [!].nes)
prg: 8DB6D11F
chr: 570B48EA
Re: Punch Out Cartridge have only TTLs instead of MMC2!
https://www.youtube.com/watch?v=yUva546 ... BruceJones
https://ibb.co/44CstyD
rodei mmc2 full perfeitamente usando este esquema
https://ibb.co/44CstyD
rodei mmc2 full perfeitamente usando este esquema